Steel 10ХНДМ
Designation
Description
10ХНДМ steel is used: for the production of billets, sheet ingots used for the production of parts and equipment oil and gas industry and shipbuilding.
Standards
Chemical composition
Fe is the basis.
According to TU 14-1-4928-90 the chemical composition is given for steel grade 10ХНДМ-Ш electroslag remelting. The total content of sulfur and phosphorus in the steel should not exceed 0.0250%. The content of vanadium and calcium is calculated. In steel 10ХНДМ-Ш calcium can be replaced by REM (rare earth metals) and vanadium titanium in the same quantities. The content of residual lead, tin, antimony, zinc, arsenic and bismuth in tali is not more than 0.050% of each and can not be determined by chemical analysis, but is guaranteed by the supplier. As agreed by the parties, the content of impurities can be reduced. Permissible deviations in the chemical composition of steel - in accordance with GOST 19281, and for aluminum ± 0.010%, for copper ± 0.10%, for molybdenum +0.050 / -0.020%.
According to TU 14-1-4928-90 the chemical composition is given for steel grade 10ХНДМ-Ш electroslag remelting. The total content of sulfur and phosphorus in the steel should not exceed 0.0250%. The content of vanadium and calcium is calculated. In steel 10ХНДМ-Ш calcium can be replaced by REM (rare earth metals) and vanadium titanium in the same quantities. The content of residual lead, tin, antimony, zinc, arsenic and bismuth in tali is not more than 0.050% of each and can not be determined by chemical analysis, but is guaranteed by the supplier. As agreed by the parties, the content of impurities can be reduced. Permissible deviations in the chemical composition of steel - in accordance with GOST 19281, and for aluminum ± 0.010%, for copper ± 0.10%, for molybdenum +0.050 / -0.020%.