Amg5 - 5056 - AlMg5 aluminum sheet, strip, tube
International Equivalent
| Mark | Analogue | W. Nr. | Aisi Uns | En | Order |
|---|---|---|---|---|---|
| AMG5 | 5056 | AlMg5 | Delivery from the stock, in stock |
Technical characteristics
Class of wrought aluminum alloys. The metal is alloyed with Mg, Mn, Fe, Zn, Cu, Ti, Be to improve technological properties.
Percentage remaining (GOST 4784−97)| Fe | Si | Mn | Ti | Al | Cu | Be | Mg | Zn | Impurities |
|---|---|---|---|---|---|---|---|---|---|
| ≤0.5 | ≤0.5 | 0.3 -0.8 | 0.02 -0.1 | 91.9 -94.68 | ≤0.1 | 0.0002 -0.005 | 4.8 -5.8 | ≤0.2 | ≤0.1 |
Hardness HB 10 -1 = 65 MPa
Mechanical properties (temperature 20°C)
| Range | GOST | s in | sT | d5 |
|---|---|---|---|---|
| - | MPa | MPa | % | |
| Tubes | 18482−79 | 255 | 110 | 15 |
| Tape | 13726−97 | 275 | 130 | 12−15 |
| Profiles | 8617−81 | 255 | 127 | 15 |
| Plate | 17232−99 | 255−265 | 110−120 | 12−13 |
| t°C | E 10- 5 | a 10 6 | l | r | C | R 10 9 |
|---|---|---|---|---|---|---|
| Degree | N/mm2 | 1/Gradus | W/(m-degree) | kg/m3 | J/(kg-degree) | Ohm-m |
| 20 | 0.71 | 2650 | 64 | |||
| 100 | 126 | 922 |
Sv — Ultimate Short-Term Strength
sT — Limit of proportionality (yield strength for permanent deformation)
d5 — Tensile elongation at break.
HB — Brinell hardness
E — Modulus of elasticity of the first kind
C — specific heat capacity
Analogues
| Germany | USA | Japan |
|---|---|---|
| DIN, WNr | JIS | |
| 3.3555 | AA5056 | 5056 |
| AlMg5 |
Supplier
We offer to buy sheet, strip, tube Amg5, 5056, AlMg5 from specialized warehouses of supplier Evek GmbH with delivery in any city. Full compliance with modern quality standards. Supplier Evek GmbH offers to buy sheet, strip, tube Amg5, 5056, AlMg5, the price is optimal in this segment of rolled products.
Buy, bargain price
We offer sheet, strip, tube Amg5, or rolled products of similar grades, the price — determined by the technological features of production, without the inclusion of additional costs. On the site of the company displays information on the latest arrivals of products. It is possible to order the products of non-standard parameters. We have the best price-quality ratio for the whole range of products. In the segment of non-ferrous alloys Evek GmbH is a profitable supplier.