Cobalt powder. Brand chemical composition.
General characteristics
Cobalt — the 27th element of the chemical periodic table, which has a symbol of Co metal with bluish-black tint. The proportion of cobalt is 8.9 g/cm3. Fine powder of cobalt recovery is made or the method by electrolytic method. Widely used in powder metallurgy. Serves as an alloying additive heat-resistant alloys, magnetic materials, high-speed steel.
Atomic (molar) mass, g/mol | The degree of oxidation | Density [g/cm3] | The melting temperature t°C | The boiling point of t°C | The heat of fusion kJ/mol |
---|---|---|---|---|---|
59 | -1 0, 2, 3 | 8,9 | 1493°C | 2957°C | 15,48 |
The most popular variation of the cobalt powder is brand PK-1U with 96% of particles ≤71 micron… bulk density not less than 1.8 g/cm3. The PC-1U electrolytic method normalizes GOST 9721−79. The content of cobalt in the powder — not less than 99.35% of,
Features cobalto powder PC-1U
The average value of the diameter distribution dcp/dm, m * | ≤45 | 45÷71 | ≥71 | Bulk density, g/cm3 *** |
---|---|---|---|---|
(32,0±5,0)/(30,0±5,0) | At least 30 | Not more than 66 | No more than 4 | Not less than 1.8 |
* the method of sedimentation.
** sieve analysis method.
*** BET method.
Chemical composition cobalto powder PC-1U
% mass | Fe | Ni | O | Cu | Si | S | Moisture |
---|---|---|---|---|---|---|---|
The 99.35 | 0,45 | 0,45 | 0,3 | 0,04 | 0,02 | 0,008 | 0,15 |
Application of PK-1U
Coating materials, manufacturing of permanent magnets, high speed tool steel, heat-resistant alloys by powder metallurgy methods. Cobalt magnets are resistant to heat, vibrations, is not demagnetized in the most difficult conditions to a temperature of 1121 °C. PC-1U is the basis of corrosion-resistant, wear-resistant, heat-resistant alloys with special properties. Cobalt powder coating enhances durability and performance details.
Buy at best price
In stock, LLC «Electrocentury-steel» a wide range of high quality metal powders at the best prices. Cobalt powder is supplied in sealed metal cans, which are to reduce the amount of air inside as much as possible, fill with powder. After that, banks with the powder are Packed in wooden crates. All products have a quality certificate of conformity with standards and technical conditions. The certificate is marked manufacturer, brand of powder, the chemical composition and properties. Implementation of orders in the shortest possible time. Wholesale buyers are offered preferential discounts.