Brass hexagon

Production

GOST 2060-2006 standardizes the manufacture of bars hexagonal section of brass grades LS59-1, L63, etc. with chemical composition according to GOST 15 527-2004. Chemical control is regulated by GOST 24 231-80. The quality of long products depend on the method of production, the state of the material and its composition. Brass hexagons can be hot-deformed (GOST 2879-88) and cold-deformed (GOST 8560-78). Production accuracy in length and thickness can be high, elevated, normal. According to the state of the material produced hexagons soft, semi-hard and hard. Labeling. By length: measured length (MD), uneven length (ND), multiple measured length (KD). Special conditions: of antimagnetic brass (АМ); ductility increased soft (L); ductility increased semihard (F); ductility increased hard (U); normal ductility pressed (C); ductility increased pressed (Ц). Hexagons in coils of free spooling (BT); in coils of well-ordered layer-by-layer spooling (BU).

Application

Hexagons are used as blanks for the production of nuts, bolts, decorative structures and polygraphic dies, stop valves. They are in demand for parts of structures and fragments of equipment in construction, engineering, electrical engineering, hydropower, shipbuilding, petrochemical, gas processing and other industries.

Brass hexahedron L63 soft, hard, semifirm

Diameter, mm	Unit of measure	Price.
10	kilo	negotiated
12	- "-	- "-
14	kilogram	- "-
16	- "-	negotiated
18	kilogram	- "-
20	- "-	negotiated
22	kilogram	- "-
24	- "-	negotiated
30	kilogram	- "-
32	- "-	negotiated

Brass LS59-1 soft, hard, semi-hard hexagon

Diameter, mm	Unit of measure	Price.
8	kilo	negotiated
10	- "-	- "-
12	kilogram	- "-
16	- "-	negotiated
20	kilo	- "-
24	- "-	negotiated
30	kilogram	- "-
32	- "-	negotiated
34	kilogram	- "-
36	- "-	negotiated
40	kilo	- "-

Advantages

Brass hexagon has high corrosion resistance, ductility, wear resistance and manufacturability. It is available for both hot and cold pressure treatment, can be easily stamped, cut, drilled, milled, easily brazed and welded. It has high thermal and electrical conductivity, gives an aesthetic appearance to products and meets the most stringent sanitary standards. Reliability, ability to work at significant temperature fluctuations, ease of installation - make the brass hexagon in demand in a variety of areas of modern production. Brass is relatively inexpensive, in addition, the material is usually reused after disposal.

Disadvantages

It does not belong to particularly durable and heat-resistant types of rolled products, if compared with iron alloys.

Marking

By production method	By precision	By length	Special manufacturing conditions	By state of material
D drawn (cold-deformed) D hot-deformed	H normal; P elevated; At high	Rough CD multiple of dimensional; BT in coils.	AV automatic hexagon, AM anti-magnetic hexagon, O with cut ends, H mild with increased plasticity, P semi-hard increased plasticity, U hard high ductility, S pressed of ordinary plasticity; T pressed with increased ductility.	M soft (annealed) P semi-hard, T hard.

By production method

By precision

By length

Special manufacturing conditions

By state of material

D drawn (cold-deformed)

D hot-deformed

H normal;

P elevated;

At high

Rough

CD multiple of dimensional;

BT in coils.

AV automatic hexagon,

AM anti-magnetic hexagon,

O with cut ends,

H mild with increased plasticity,

P semi-hard increased plasticity,

U hard high ductility,

S pressed of ordinary plasticity;

T pressed with increased ductility.

M soft (annealed)

P semi-hard,

T hard.

Supply

We supply certified brass hexagon. Price depends on parameters and additional delivery conditions. Technical documentation includes data on the percentage composition and performance qualities of products. With us it is easy to buy in bulk any semi-finished products for large-scale production. We also cooperate with retail buyers. The high level of service and responsiveness of service is the face of our company.

Buy at a bargain price

Evek GmbH has an unlimited assortment of semi-finished products made of non-ferrous metals of the highest quality. We offer brass hexes of any parameters at the best price. If you are interested in our offer, please contact your nearest office. Qualified specialists will provide all necessary information regarding products, price range, sales conditions. The cost of goods depends on the parameters of products and additional terms of delivery.