SHH15 - 100Cr6 - 1.3505 - aisi 52100 - round, rod, forging
International Equivalent
Mark | Analogue | W. Nr. | Aisi Uns | En | Order |
---|---|---|---|---|---|
ШХ15Ф | EI760 | ~1.3505 | ~52100 | ~~100Cr6 | Delivery from the stock, in stock |
The company Electrocentury-steel offers to buy forgings, rounds and rods ball-bearing steel grades SHKH15, 100Cr6, 1/3505, AISI 52100. Guaranteed cost-effective price from the manufacturer. Buy-forged and rolled steels data can be delivered to any place specified by the customer.
Chemical composition
Steel of this class are characterized by a high content of carbon and chromium that increase hardness and wear resistance of bearing units. Steel SHKH15 produced in accordance with the requirements of GOST 801, has the following composition:
Item | Carbon | Silicon | Manganese | Chrome | Nickel | Copper |
---|---|---|---|---|---|---|
The percentage | 0,95 1,05… | 0,17…0,37 | 0,20…0,40 | 1,30 1,65… | To 0.30 | To 0.30 |
As a metallurgical impurities in the composition of steel SHKH15 are sulfur (in the amount not higher than 0.02%) and phosphorus (in the amount not higher than 0,027%).
Foreign analogues of steel SHKH15 — AISI 52100 (melted) and 100Cr6 1.3505 (melted in Europe). In composition they differ from the domestic counterpart, which follows from the table:
Item | Carbon | Silicon | Manganese | Chrome | Molybdenum | Copper | Aluminium |
---|---|---|---|---|---|---|---|
The percentage | 0,93 1,05… | 0,15…0,35 | 0,25…0,45 | 1,35 1,60… | To 0.10 | To 0.30 | To 0.30 |
The percentage content of the impurities — sulfur and phosphorus — limited to 0.025% of each of the elements. In addition, the steel allowed svyazannyh of oxygen in the amount not higher than 0,0015%.
Buy bulk rolling and forging of ball-bearing steel grades SHKH15, 100Cr6, 1.3505, AISI 52100, the company offers Electrocentury-steel. The price is from the manufacturer. The supplier shall ensure strict compliance with the terms of product delivery, and in the place specified by the client.
Properties and applications
These ball bearing steel grades are supplied in accordance with the requirements of standards EN ISO 683−17 and DIN 17350. In the annealed condition the steel has the following physical-mechanical properties:
- Tensile strength, MPa — 590…730;
- The plastic limit, MPa — 390…510;
- Elongation, percent — 15 to 20;
- The relative narrowing, % — 25…15;
- Hardness Brinell, HB — 179…207.
Characteristics depend on the cooling regime, temperature, and grade of material. Steel have a high sensitivity to the formation placenow, as well as to the brittleness after the holidays. Respond well to grinding.
The company Electrocentury-steel offers to buy at factory price round, rod, forgings of steel SHKH15, 100Cr6, 1.3505, AISI 52100. Guaranteed delivery of products to any place specified by the customer.