CuAl11Ni - C95520 sheet, strip, tube
International Equivalent
| Mark | Analogue | W. Nr. | Aisi Uns | En | Order |
|---|---|---|---|---|---|
| C95520 | CuAl11Ni | Delivery from the stock, in stock |
Technical characteristics
This bronze contains up to 12% Al, and 4-7,5% nickel, besides it is alloyed with iron, manganese and zinc. The peculiarity of this alloy is increased specific strength and improved mechanical properties.
Percentage composition of EN 1982-2008 (Cu 72 - 82.5%)
| Cu | Fe | Mn | Ni | Al | Zn | Sn | Si | Mg | Pb |
|---|---|---|---|---|---|---|---|---|---|
| basis | 4 - 7 | ≤ 2.5 | 4 - 7.5 | 10,5 - 11,5 | ≤0.5 | ≤0.2 | ≤0,1 | ≤0.05 | ≤0.05 |
Mechanical properties (temperature 20 °С)
| Range | s in | sT | d5 | Hardness HB 10 -1 |
|---|---|---|---|---|
| - | MPa | MPa | % | MPa |
| Bar products | 600-750 | 320-380 | 5 | 170-185 |
sT - ultimate strength
sT - limit of proportionality (yield stress for permanent deformation)
d5 - Tensile elongation at break.
HB - Brinell hardness
Analogues
| Germany | European Union |
|---|---|
| DIN, WNr | EN |
| CuAl11Fe6Ni6-C | 2.0980.01 |
| 2.0980.02 | |
| 2.0980.0 | |
| G-CuAl11Ni | |
| GK-CuAl11Ni | |
| GZ-CuAl11Ni |
Applications
Electrical engineering, transport engineering, parts in contact with sea water, hatches for marine equipment.
Cold working
Turning, milling, grinding, drilling.
Heat treatment
Normalization, hardening, annealing, tempering.
Storage
Stored in covered or roofed warehouses, adequately protected from mechanical and other types of damage.
The supplier
We offer to buy bronze band, tubes, sheets C95520 from specialized warehouses of the supplier Evek GmbH with delivery in any city. Full compliance with international quality standards. Supplier Evek GmbH offers to buy bronze band, pipe, sheet C95520, the price is optimal in this segment of rolled products.
Buy, bargain price.
We offer bronze band, pipe, sheet C95520, the price - is determined by the technological features of production without the inclusion of additional costs. It is possible to order products with non-standard parameters. In the segment of non-ferrous alloys the company Evek GmbH is a profitable supplier.