x27yu5t - ei626 fechral wire

International Equivalent

Mark Analogue W. Nr. Aisi Uns En Order
X27Yu5T EI626 Delivery from the stock, in stock

General Characteristics

Fechral X27Yu5T contains 63-67% Fe, 25-27% Cr, 5-5.9% AL. Titanium additive up to 1% is indicated at the end of the marking. Additionally the composition is ligated with silicon, manganese, nickel. It is a hard brittle alloy that is difficult to roll, has a high electrical resistance of about 1.3 Ohm*mm2/m, increased heat resistance. Melting point of approximately 1450 °C, the maximum operating temperature is 950 °C. No particular limitations on weldability, tape, wire and strip production is possible. Suitable for aggressive chemical environments. Used for electric heating furnaces and resistor parts.

Percentage composition

Alloy С Mn Al P S Ni Ba Cr Si Ti Ce Zr Fe Ca
X27YU5T ≤0.05 ≤1,5 5-5,8 ≤0.02 ≤0.015 ≤0,6 ≤0,5 26-28 ≤0,6 0,15-0,4 ≤0,1 ≤0,1 ≤0,1 ≤0,1

Advantages

Fechral X27Yu5T has a melting point: almost 1500 ° C. Electrical resistance: 1.2 Ohm*mm2/m, density 7.2 g/cm³. This alloy is 17% lighter than nichrome, and the cost of its production is six times cheaper, because the scarce nickel is replaced by cheap aluminum and iron. The alloy demonstrates high corrosion resistance in: oxidizing, carbon-bearing, sulfuric environments

Delivery

All products are certified. The technical documentation includes data on the chemical composition, the limiting percentage of impurities, and the mechanical properties of products. We supply in bulk any semi-finished products for large-scale productions. We offer the best conditions for retail customers. We produce custom products to order in a short time.

Buy at a bargain price

From the warehouse of the company "Evek GmbH" an unlimited assortment of rolled metal products to order. We sell ribbon, wire, strip fehrali at the best price. It is formed taking into account European rates for nonferrous metals without including additional costs. Certificate of quality includes data on the chemical composition, the limiting percentage of impurities; mechanical properties. Cooperation with us provides a number of advantages. Our specialists will be happy to advise you on the purchase of products, the correct choice of which will depend on the performance and durability of the equipment. We will help to determine not only the optimal parameters of products, but also offer the best price.