BT-14 titanium circle, rod, sheet
International Equivalent
| Mark | Analogue | W. Nr. | Aisi Uns | En | Order |
|---|---|---|---|---|---|
| ВТ14 | Delivery from the stock, in stock |
General characteristics
Titanium alloys klassificeret configuration of crystal lattices: α-lattice in the form hexahedron), β respectively, α+β mixed state. Alloy VT14 refers to the α+β alloys, it is alloyed with 1.4% of V, 3% Mo, 5% Al, produced according to GOST 19 807−74. 90 013−81. Developed by Vinom in 1960, This is the first heat-treatable alloy developed by the industry. It is used in annealed and thermally hardened state. The effect of aging is approximately 30%. Hardenability is small (in cross section no more than 40 — 45 mm). Foundry option alloy — ВТ14Л.
Advantages and application of titanium alloy VT14
| UD. weight | t° plaul. | Properties | Technology | Application |
|---|---|---|---|---|
| Of 4.50 g/cm3 | 920−960° | A significant content of beta stabilizers (molybdenum and vanadium) provides the beta-phase in quantities sufficient for thermal hardening. Recommended for operation up to 400 °C. | Well-deformed in hot state. The basic operation of forming is carried out under heating. Alloy welded satisfactorily. Good castability. | Stamp-welded construction, continuously operating up to 350 — 400 °C, the design of the pipes, and mounting parts. |
Advantages and manufacture of titanium pipe VT14
| Prefabricated | Heat treatment | Strength (MPa) | Plasticity of δ% | KCU j/cm3 |
|---|---|---|---|---|
| Pipe hot rolled | Annealing | More than 850 | More than 8% | More than 50 |
| The annular stamping (banded structure) | Quenching + aging | 1127 — 1189 | 4 — 6.4% of | 19,6 — 22,5 |
| The annular stamping (fine structure) | Quenching + aging | 1117 — 1156 | 8,8 — 10,2% | 35,2 — 41,1 |
Supply
Supplied in a wide range of pipe, wire, circle, sheet of stamps VT14 any parameters. Presented titanium products are certified. In the technical documentation included data on chemical composition, limiting the percentage of impurities; mechanical qualities of the products. We can buy in bulk any semi-finished products for large-scale production. We also offer optimal conditions for retail customers. A high level of service and speed of service are the face of our company.
Buy at best price
On the website LLC «Electrocentury-steel» reflects the most current information on the acquisition of the titanium alloys today. Experienced managers who are always ready to provide qualified advice on any current issues. Sell semi-finished products of rare and non-ferrous at a competitive price. The products are manufactured on the most modern equipment and meets the quality requirements of Russian state standard and international quality standards. Regular customers receive a discount system of discounts.
