Lo62-1 - 2.0530 - c46400 rod, tape, wire
International Equivalent
Mark | Analogue | W. Nr. | Aisi Uns | En | Order |
---|---|---|---|---|---|
ЛО62 | 2.0530 | c46400 | ~CuZn39Sn1 | Delivery from the stock, in stock |
Relevance
Complexly brass LO62 refers to pressure treated alloys. It features good resistance to corrosion. Widely used in the production of semi-finished products such as pipes, sheets, profiles, used in instrumentation for the production of condensates, heat engineering equipment.
Production
The chemical composition of grade LO62 normalized GOST 15 627−2004. The alloy comprises the following components: the main part of copper is 61 — 63%, zinc is contained in an amount of 35.6 — 38.3%. Dopants are listed in descending order. Tin 0.7 — 1.1%, lead and iron — 0.1% Phosphorus — up to 0.01%, Sb — 0.05%, 0.002% bismuth, impurities — not more than 0.3%. Alloy melts at t ° 906 ° C, is treated at t ° 700 — 780 ° C, the annealing temperature is 550 — 650 ° C. Produced bars, hard pressed and GOST 2060- — - — 2006, the band hot and cold-rolled GOST 931−90. also produced rods, bars, plates, tubes for condensers and heat exchange equipment.
The percentage of LO62 grade (GOST 15 527−2004)
Zn | Cu | Fe | Pb | Sn | P | Bi | Sb | Ni | Impurities |
---|---|---|---|---|---|---|---|---|---|
35,6−38,3 | 61−63 | ≤0,1 | ≤0,1 | 0.7−1.1 | ≤0,01 | ≤0,002 | ≤0,005 | --- | ≤0,3 |
dignity
Brass hire has a number of advantages over the more expensive copper. In particular, brass LO62 has a higher strength than copper, which along with high adaptability, allows for responsible products of any type and complexity.
Buy at a bargain price
In stock company «Electrovek-steel» in the presence of a diverse range of non-ferrous alloys at the best price. The choice will satisfy any customer. Brass LO62 rental brands in bulk and retail. The popularity of the products of this alloy is due to a huge variety and excellent quality products. All products of our company are manufactured under full control of the process chain, which ensures 100% quality guarantee. We are ready to supply the non-standard products customized settings. Technological capabilities in the production stages make it possible to carry out individual orders in the absence of the basic version of the requested type of the product. Lead times are minimal. The price depends on the volume of supply and the implementation of additional conditions. flexible system of discounts for bulk orders.