Stamping tool steel

International Equivalent

Mark Analogue W. Nr. Aisi Uns En Order
X12MF 1.2379 K110 Delivery from the stock, in stock
5X3V3MFS DI23 Delivery from the stock, in stock
4X5V2FS EI958 Delivery from the stock, in stock

General Characteristics

Tool steels with high heat and wear resistance designed for metalworking, production of molds, dies, molds for metal casting are referred to stamping steels.

Groups Characteristics
Cold metal forming dies
Production of cold forming die molds. After hardening the hardness of cutting edges, the high wear resistance necessary to maintain the parameters of the working edges during punching, the strength of the working edge both when pressing the semi-finished product and the sections of the die that resist the bending loads and torque
Hot metal forming dies
Maintain their performance at elevated temperatures. After heat treatment, they have the highest toughness and average hardness of similar steels.
Corrosion resistant die steels The manufacture of die dies and molds for die casting alloys. Similar to the previous group, this steel is resistant to corrosive environments when exposed to chemically active materials or aggressive components.

The main qualities of die steels are:

1. Toughness combined with high hardness;

2. Sufficient machinability for hot or cold work by cutting or pressure;

3. Hardenability gives homogeneous fine crystalline structure and homogeneously high hardness;

4. Insensitivity to overheating: red resistance;

5. Minimal deformation during heat treatment;

6. Insensitivity to decarburization under incandescence, preservation of hardness of the working edge;

7. Good polishability - enhances the quality of the surface of stamped products.

Chemical composition in % of material

Mark C Mn Si S Ni P Cr Mo V Cu Nb W
X12MF 1.45-1.65 0.15-0.45 0.1-0.4 up to 0.03 up to 0.35 up to 0.03 11-12,5 0.4-0.6 0.15-0.3 up to 0.3 - -
5Х3В3МФС 0.45-0.52 0.2-0.5 0.5-0.8 up to 0.03 up to 0.35 up to 0.03 2.5-3.2 0.8-1.1 1.5-1.8 up to 0.3 0.05-0.15 3-3,36
4Х5В2FS 0.35-0.45 0.15-0.45 0.8-1.2 up to 0.03 up to 0.35 up to 0.03 4.5-5.5 - 0.6-0.9 up to 0.3 - 1.6 - 2.2
X12MF hardness after annealing, HB 10 -1 = 255 MPa
Hardness of 5X3V3MFS after annealing, HB 10 -1 = 229 - 241 MPa
Hardness of 4X5V2FS after annealing, HB 10 -1 = 241 MPa

Delivery

We sell certified die steel. The price is formed taking into account the European rates for the metal, without the inclusion of additional costs. From us it is easy to buy in bulk any semi-finished products for large-scale productions. We provide favorable conditions for retail buyers. Our company is distinguished by a high level of service and responsiveness of service.

Buy at a bargain price

Stamping steel from the company Evek GmbH meets domestic and international quality standards. We deliver in the shortest possible time. All the production of our company, produced under the strict control of the whole technological chain, which guarantees the highest quality. Technological capabilities of production allow for individual orders in the absence of a necessary type of product in the basic version. We offer discount discounts. Delivery - as soon as possible.