Sheet, round, wire HN56MVTYU - ЭП199

International Equivalent

Mark Analogue W. Nr. Aisi Uns En Order
KhN56VMTYu EP199 Delivery from the stock, in stock

General characteristics

Steel grade KHN56VMTJU-VD (ЭП199-VD) is a heat-resistant alloy based on Nickel. The composition contains 52 — 64% Ni, 4% Fe, 19 — 22% Cr. Used for doping silicon, tungsten, aluminum, manganese, molybdenum, phosphorus, sulfur, titanium, boron. Semi rusk in the temperature range from 1170° C (first process), 850° (at the end), after which the product is cooled in air. This type of steel refers to a hard base, to obtain compounds of high quality necessary pre-heating of parts to temperature of 200−300°C with additional heat treatment — annealing after welding. Fastening parts and subassemblies is performed by means of manual arc welding electrodes KTI-762. The final heat treatment is necessary in order to be able to remove welding stress.

The percentage composition of (GOST 5632−72)

Si C Mo Mn P S Ni Cr Al W In Fe Ti
≤0.06 ≤0.1 4−6 ≤0,5 ≤0.015 ≤0.015 52,1−64,8 19−22 2,1−2,6 9−11 ≤0,008 ≤4 1,1−1,6

Use

Hot rolled seamless pipe, warm, cold rolled brand KHN56VMTJU-VD used in the construction of industrial pipelines for discharging hot gases, installation of heating systems. Designed for continuous operation at a temperature of about 650 °C. to Produce pipe of conventional and high precision. They are also used for the production of discs, rotors operating in the difficult conditions of petrochemical engineering. Quality alloy allows us to produce products that can withstand in some situations, the load at temperatures up to 850 °C. At a temperature> 850° begins to rapidly form slag. Such a tube may be included in the layout of drainage systems. In accordance with the wishes of the customer it can be with different kinds of thread. Thread sizes, assortment of pipes normalized GOST requirements. The tube can be made dimensional with a length of 4−12 m, with variable and multiple dimensional length. In the latter case, for each cut the stock to produce 5 mm, and the longitudinal deviation of the size in length must not exceed 10 mm. Welded tubes can be welded round and shaped with rectangular, oval or square cross-section. Pipe and round steel KHN56VMKJU are the most popular rental products.

The leaves of this steel are used as components of high temperature installations, the petrochemical industry and engineering. Prolonged service of the products is limited by limiting t° 850 °C — above, an active formation of scale. This steel is used for the production of discs, fasteners, flat springs which can do the job in difficult conditions.

Supply

All the products are certified. In the technical documentation included data on chemical composition, limiting the percentage of impurities; mechanical qualities of the products. We can buy in bulk any semi-finished products for large-scale production. We also offer optimal conditions for retail customers. A high level of service and speed of service are the face of our company.

Buy at best price

In stock, LLC «Evek GmbH» has a range chromium-iron-Nickel alloys. Supply certified products of domestic and foreign manufacturers. We value our customers, so are always happy to provide expert assistance with the selection. It offers experienced managers-consultants. Product quality is guaranteed by strict observance of the norms of production. Execution of orders takes minimal time. Wholesale customers receive discounts.