03Х20Н16АГ6 - sheet, circle, wire

International Equivalent

Mark Analogue W. Nr. Aisi Uns En Order
03Х20Н16AG6 Delivery from the stock, in stock

Characteristics

Grade 03X20H16AG6 refers to manganese-chromium-nickel austenitic steels. It is melted in electric arc furnaces. It is produced in accordance with TU 14−1-3291−81 and 14−1-2922−80. This steel is used in cryogenic engineering in the manufacture of welded large containers that are kept under pressure for a long time at periodic change of tº from 20 ° C to -250 ° C.

The percentage composition

C Cr Si Mn N Ni P S Fe
≤0,025 20−25 ≤0,6 6−7,5 0,15−0,28 15−16,5 ≤0,025 ≤0,02 Basis

Mechanical properties at t=20 °C

TU Products σ0, 2, N/mm² σ in, N/mm² δ5, % KCV,
J/cm²
14−1-2922−80 Rods 350−370 650−670 >30 >120
14−1-3291−81 Hot-rolled sheets >370 >670 - -

Mechanical properties at low (cryogenic) tº (rod Ø 16 mm, quenching process in water at 1000 °С)

tisp, °C σ0.2, N/mm² σc, N/mm² δ5, % ψ, % KCU, J/cm2 KCV, J/cm²
-196 900 1550 48 44 120 -
-253 1360 1930 31 27 100 80
-269 1000 1500 25 21 80 -

Mechanical properties at high tº (sheet 16 mm, water hardened at 1050 °C)

tisp, °C σ0.2, N/mm² σc, N/mm² δ5, % ψ, % n, r
900 110 162 18,4 18,6 -
950 73 120 19 17,9 -
1000 50 88 32,9 20,7 6−8,8
1050 38 63 38,6 29,8 6,5−7,5
1100 26 44 40 39,8 8,1−8,2
1150 23 27 43,3 36 13,2−12,5
1200 23 27 41,8 36,6 14,5−20,0
1250 12 14 64,4 50,6 18

Mechanical properties depending on the degree of cold plastic deformation (sheet 3 mm, after quenching in water at 1000°C)

Degree of compression, % σ0, 2, N/mm² σc, N/mm² δ5, % Degree of compression, % σ0, 2, N/mm² σ in, N/mm² δ5, %
0 370 675 52 40 950 1060 8
10 590 780 38 60 1160 5 -
20 820 880 18 - - - -

Physical properties at 20°C

The density is 7.8 g/cm3; specific heat capacity 481 J/(kg — K); modulus of elasticity 19.6x10−4 N/mm2; temperature coefficient of linear expansion α = 16,1x10−6/°C. Thermal conductivity at 100 °C = 17.5 W/(m — K);

Corrosion resistance

In the hardened state, steel is characterized by resistance to corrosion, not only in weakly acidic media, but also in moderately acidic ones, as well as in industrial condensate. In solution of 15−55% HNO3 its resistance is similar to X18H10 steel.

Technological parameters

Hot deformation is carried out at t° 1200−900°C. The steel is easily stamped, both in hot and cold states. Due to its tendency to strain-hardening, more force is needed for cold forging.

Welding

Steel is welded by manual or automatic submerged-arc welding or by automatic argon arc welding. Heat treatment of welds is not required.

Properties of welded joints made by manual argon-arc welding (16 mm sheet).

TiSp, °C tisp, °C tisp, °C tisn, °C σw, N/mm² σw, N/mm² σw, N/mm² σw, N/mm² KCU, J/cm2 KCU, J/cm2 KCU, J/cm2 KCU, J/cm2 Bending angle, deg.
20 20 20 20 680 680 680 680 100 100 100 100 180
-253 -253 -253 -253 1610 1610 1610 1610 40−90 40−90 40−90 40−90 -


Supply

-


Supply

All the presented 03Х20Н16АГ6 grade steel is certified. Technical documentation includes data on chemical composition, limiting percentage of impurities; mechanical properties of products. From us you can buy in bulk any semi-finished products for large-scale production. We also offer optimum conditions for retail buyers. The high level of service and responsiveness of service is the face of our company.

Buy at the best price

The website of Evek GmbH reflects the most up-to-date information on the purchase of stainless steel alloys to date. Experienced managers who are always in touch are ready to provide highly qualified advice on any current issues. We sell semi-finished products of rare and non-ferrous alloys at a competitive price. Products are manufactured on the most modern equipment and meet the requirements of international quality standards. Regular customers are offered a system of discount discounts.