LAF60-1-1 rod, strip, wire
International Equivalent
| Mark | Analogue | W. Nr. | Aisi Uns | En | Order |
|---|---|---|---|---|---|
| LAZH60-1-1 | Delivery from the stock, in stock |
Technical characteristics
Compound alloyed brass, pressure treated, alloyed with iron, aluminum, manganese. Melting point 904 °C.
Percentage composition according to GOST 15527-2004
| Fe | Mn | P | Al | Cu | Pb | Zn | Sb | Bi | Impurities |
|---|---|---|---|---|---|---|---|---|---|
| 0.75 - 1.5 | 0.1 - 0.6 | ≤ 0.01 | 0.7 - 1.5 | 58 - 61 | ≤0.4 | 34.7 - 40.4 | ≤ 0.005 | ≤0.002 | ≤0.7 |
| Range | GOST | s in | d5 | Hardness HB 10 -1 |
|---|---|---|---|---|
| - | MPa | % | ||
| Pressed bars | 2060-2006 | 440 | 18 | |
| Soft alloy | 400-450 | 45-55 | 45 - 55 | |
| Hard alloy | 700-750 | 7-10 | 165 - 175 |
Physical material properties
| t° | E 10- 5 | a 10 6 | l | r | C | R 10 9 |
|---|---|---|---|---|---|---|
| Degree | MPa | 1/Gradus | W/(m-degree) | g/cm3 | J/(kg-radius) | Ohm-m |
| 20 | 1.05 | 75.3 | 8,3 | 90 | ||
| 100 | 21.6 |
sc - Ultimate short-term strength
d5 - Tensile elongation at break.
HB - Brinell hardness
E - Modulus of elasticity of the first kind [MPa]
C - specific heat capacity
Heat treatment
Heat treatment temperature 600 - 800 °C. Annealing temperature 600 - 650 °C.
Analogues
Japan: JIS C6782
Cold work
Turning, milling, grinding, drilling.
Applications
Hot workpieces with high strength and wear resistance; insensitive to corrosion;
Storage
Stored in covered warehouses or under a shed, where adequate protection against mechanical and other types of damage is provided.
Supplier
We offer to buy brass tape, wire, bar LAZH60-1-1 from specialized warehouses of the supplier Evek GmbH with delivery in any city. Full compliance with international quality standards. Supplier Evek GmbH offers to buy brass tape, wire, bar LAF60-1-1, the price - optimal in this segment of rolled products.
Buy, bargain price
We offer brass tape, wire, rod LAF60-1-1, price - determined by technological features of production without the inclusion of additional costs. It is possible to order the products of non-standard parameters. We have the best price-quality ratio for the whole range of products. In the segment of non-ferrous alloys Evek GmbH is a profitable supplier.
