1.4713 Pipe, wire, circle
International Equivalent
Mark | Analogue | W. Nr. | Aisi Uns | En | Order |
---|---|---|---|---|---|
10Х17СУ | 1.4713 | X10CrAl7 | Delivery from the stock, in stock |
Supplier
We offer to buy tube, wire, circle from warehouse of supplier Evek GmbH. Full compliance with international quality standards. The supplier Evek GmbH offers to buy sheet, strip, 1.4713, today's best price.
Technical features
Stainless heat resistant low alloyed steel of martensitic class. The basis of the alloy is iron: its share of about 90%. The composition is alloyed with chrome, manganese, aluminum. Impurities not more than 0,3%. It is used in the manufacture of pipes, pipe fittings, parts of boiler installations, working at t ° up to 600 ° C; Service life over 10000 hours. The temperature of intensive scale formation is higher than 650 °C.
Percentage composition EN 10095-1999
Fe | C | Si | Mn | S | P | Cr | Al | Impurities |
---|---|---|---|---|---|---|---|---|
basis | ≤ 0.15 | 1.2 - 1.8 | ≤0.5 | ≤0.025 | ≤0.03 | 5.5 - 7 | 0.7 - 1.1 | ≤0.3 |
Alloying has a multidimensional effect on steel quality. Chromium increases hardness, corrosion resistance. Manganese content above 1% increases hardness, impact strength and wear resistance. Aluminum increases processability and prevents rusting.
Mechanical properties (t° 20°C)
Range | GOST | s in | sT | d5 | y | Heat treatment |
---|---|---|---|---|---|---|
- | MPa | MPa | % | % | - | |
Bar | 5949-75 | 440 | 245 | 20 | 40 | Annealed at 750 - 800 °C, air-cooled |
Analogues
EU | Germany | Italy | GOST | France | Czech Republic |
---|---|---|---|---|---|
EN | DIN, WNr | UNI | GOST | AFNOR | CSN |
X10CrAlSi7 | X10CrAlSi7 | X7AL | 15CR6CU | Z8CA7 | 17113 |
15Kh6SYu | |||||
EI428 | |||||
X6CU |
Buy, bargain price
Where to order stainless heat-resistant steel? We offer tube, wire, circle 1.4713, the price - does not include additional costs. In the segment of heat-resistant stainless steel, Evek GmbH is a profitable supplier.