14H17N2 - ei268 pipe
International Equivalent
Mark | Analogue | W. Nr. | Aisi Uns | En | Order |
---|---|---|---|---|---|
14Х17Н2 | EI268 | Delivery from the stock, in stock |
Composition and Properties
Steel brand 14H17N2 (EI268) is complexly stainless chromium-nickel alloy martensitoferritnogo class. It is composed of 16−18% chromium, 1.5−2.5% nickel, 0.8% manganese and silicon, 0.3% copper and 0.2 of titanium, 0,11−0,17% of carbon and thousandths of a percent of phosphorus and sulfur. Specific weight rolled at 20 ° C 7,75 g / cm³. Pipes of this alloy grades have exceptional resistance to corrosion, the highest rate of tensile strength, ductility and sufficient processability.
The percentage of the brand 14H17N2 (GOST 5632−72)
C | Si | Cu | Mn | Ni | Cr | P | S | Ti | Fe |
---|---|---|---|---|---|---|---|---|---|
0,11−0,17 | ≤0,8 | ≤0,3 | ≤0,8 | 1.5−2.5 | 16−18 | ≤0,03 | ≤0,025 | ≤0,2 | the basis |
Mechanical properties of semi-finished products
assortment | GOST | σ B | σ T | 5 d | hardening |
---|---|---|---|---|---|
Rod Ø 60 | 5949−75 | 1080 | 835 | 490 | Tempering 975 — 1040 o C air cooling |
Rod Ø 60 | 5949−75 | 835 | 635 | 750 | Hardening 1000 — 1030 o C, the cooling oil. Holidays 620 — 660 o C, air cooling |
Forgings ≤ 1000 mm | 25 054−81 | 686 | 539 | 490−590 | Tempering 980 — 1020 o C, the oil, leave 680 — 700 o C, air cooling, |
thick sheet | 7350−77 | 1080 | 885 | Quenching and tempering |
The σ — limit of short-term strength;
σ T — yield limit for residual deformation.
Quality and Use of pipes
Made of alloy pipes are widely demanded in various spheres of human activity. They are heat-resistant, does not undergo deformation at high temperature in an environment rich in oxygen does not have strong magnetic properties. Pipes from a steel successfully resist rust, widely used in shipbuilding, chemical, petroleum, food, medical industry. They are released at a price that is slightly higher than the average cost of stainless steel, however, the reliability and durability of products to justify all costs. Steel 14H17N2 successfully used as a structural material for the production of discs, shafts, bushings, pumps and compressors operating in hostile environments. Pipes in demand in the construction of steam generators in power plants, as well as the production of salt.
Supply
All 14H17N2 brands presented products are certified. The technical documentation includes data on the chemical composition, limiting the percentage of impurities; mechanical properties of products. We can buy in bulk, any semi-finished products for large-scale productions. We also offer optimal conditions for retail customers. High level of service and efficiency of service are the face of our company.
Buy at the best price
The site of LLC «Electrovek-steel» reflects the most current information on the acquisition of stainless alloys available today. Experienced managers who are always in touch, ready to provide highly qualified advice on any current issues. We sell semi-finished non-ferrous and rare at a competitive price. Products manufactured at the most modern equipment and meets the requirements of Russian State Standard of quality and international quality standards. Regular customers receive a discount system of discounts.