15Х1М1Ф - 15crmov5-9 - 1.8521 pipe, round, bar
International Equivalent
| Mark | Analogue | W. Nr. | Aisi Uns | En | Order |
|---|---|---|---|---|---|
| 15X1M1F | 1.8521 | 15crmov5-9 | Delivery from the stock, in stock |
Evek GmbH offers to buy low-alloy steel 15Х1М1Ф, 15CrMoV5-9, 1.8521 at producer price. The supplier guarantees quality and timely delivery of purchased products
Company Evek GmbH offers to buy a tube and a circle from structural steel of 15Х1М1Ф, 15CrMoV5-9, 1.8521 grades. The price is from the manufacturer. Supplier guarantees the performance of the assortment of supply and quality of the purchased products.
Composition and properties
Boiler low-carbon steel of 15Х1М1Ф grade is produced according to technical requirements
| Alloying element | Carbon | Silicon | Manganese | Chrome | Molybdenum | Vanadium | Nickel |
|---|---|---|---|---|---|---|---|
| Percentage content | 0,10...0,16 | 0,17...0,37 | 0,40...0,70 | 1,1...1,4 | 0,9...1,1 | 0,20...0,25 | Up to 0.25 |
According to specification, the steel can also contain copper (not more than 0.25%), and as metallurgical impurities there are sulfur and phosphorus, the quantity of each element is limited to 0.025%.
The closest foreign analogues of this steel are as follows: steel 15CrMoV5-9 in Germany (produced in compliance with DIN 17211), steel 1.8521 in the USA. These steels are classified as heat resistant low alloy steels and according to EN 10204 have the following chemical composition:
| Alloying element | Carbon | Silicon | Manganese | Chromium | Molybdenum | Vanadium |
|---|---|---|---|---|---|---|
| Percentage content | 0,130...0,18 | Up to 0.40 | 0,8...1,1 | 1,2...1,5 | 0,8...1,1 | 0,2...0,3 |
The analogues under consideration have less stringent tolerances for sulfur and phosphorus: 0.030% and 0.025%, respectively.
The company Evek GmbH offers to buy heat-resistant low-alloy steel of 15Х1М1Ф, 15CrMoV5-9, 1.8521 grades at the producer's price. The supplier guarantees product delivery to any point specified by the customer.
Application
Steels lend themselves well to machining, and high-temperature carburizing is used as the main type of heat treatment. The result is increased surface hardness with a ductile core. Hardness after annealing does not exceed 248 NV, with strength values up to 1100 MPa, ductility up to 750 MPa and elongation 10-12%.
Steel is used in shipbuilding, production of vehicles and aircrafts, bridges, railway tracks, pressure vessels, etc.
Company Evek GmbH offers to buy a tube and a circle of heat-resistant structural steel 15Х1М1Ф, 15CrMoV5-9, 1.8521 at economical price from the manufacturer. Supplier provides timely delivery of products to the point specified by the customer.