VT1-2 - titanium grade 4 circle, rod, sheet
Relevance
Brand VT1−2 serves as a basis for the production of various alloys. Particular practical value have the borides of titanium — compounds used in nuclear boilers to slow down the chain reaction, due to the refractoriness and a wide cross-section of neutron capture. The halides of titanium, oxides and silicides are used in the technique of high temperatures. Carbides having a high hardness, are part of the tool alloys used in abrasive material, edges of cutting tools. VT1−2 is perfectly amenable to polishing, color anodizing and other methods of treatment. Used in the manufacture of various art products.
Grade: | Classification: | Industrial use: |
---|---|---|
VT1−2 | Technical Titan | The alloy used for the production of semi-finished products (strips, foils, sheets, strips, rods, plates, profiles, forged pieces, pipes, forgings, ingots) method of deformation. |
The percentage composition of the alloy VT1−2 according to GOST 19 807- — 91
Ti | C | Si | H | Fe | N | O | Impurities |
---|---|---|---|---|---|---|---|
97.8−99.7 | ≤0.1 | ≤0.15 | ≤0.01 | ≤1.5 | ≤0.15 | ≤0.3 | other 0.3 |
Note: the Titan is a basis; its percentage content is about 97.8−99.7%.
Physical properties (t°20°C)
Assortment | GOST | Eg. | blower SB | d5 | y | KCU | Heat treatment |
- | - | MPa | % | % | kJ / m2 | - | |
Rod annealed | 26492−85 | 590−930 | 8 | 17 | 250 | Annealing |
Marking physical properties:
Description | Marking |
---|---|
Temperature obtain information about the alloy [Hail] | — T |
— The modulus of elasticity of the 1st kind [MPa] | — E |
— Coefficient of thermal linear expansion (at 20°C) [1/Deg] | -a |
— Electrical resistivity [Ohm·m] | -R |
— Specific gravity [g/cm3] | -r |
— Thermal conductivity coefficient [W/(m·deg)] | -l |
— Specific heat (at 20°C) [j/(kg·deg)] | -C |
Marking mechanical properties:
Description | Marking |
---|---|
— The limit of proportionality (yield strength for permanent deformation) [MPa] | sT |
— Short-term strength [MPa] | blower SB |
Contraction ratio [ % ] | y |
The elongation at break [ % ] | d5 |
— Brinell hardness number, [MPa] | HB |
— Impact strength [ kJ / m2] | KCU |
Weldability
Marking | Description |
---|---|
limited weldability | — required pre-heating to a temperature of 100−120°C with the final heat treatment |
without restrictions | — no need for pre-heating and the final heat treatment |
Difficult weldability | — required pre-heating to a temperature of 200−300°C with the final heat treatment |
Use
Titan technical VT1−2 serves as the basis of tanks, pipelines, chemical reactors pumps, valves and etc. products, operating in aggressive environments, e.g. in chemical engineering. VT1−00 is used for coating steel parts hydrometallurgical equipment. The use of titanium increases profitability and life of the equipment, allows to optimize technological process in the hydrometallurgical processing of nonferrous metals. Having a biological harmlessness, titanium has become an excellent material for the food industry and reconstructive surgery. The strength of the titanium in conditions of extreme cold increases while maintaining ductility that allows it to be used as structural material for cryogenic equipment.
Supply
Submitted to the rental brand VT1−2 certified. In the technical documentation included data on chemical composition, limiting the percentage of impurities; mechanical qualities of the products. We can buy in bulk any semi-finished products for large-scale production. We also offer optimal conditions for retail customers. A high level of service and speed of service are the face of our company.
Buy at best price
On the website LLC «Electrocentury-steel» reflects the most current information on the acquisition titanov alloys to date. Experienced managers who are always ready to provide qualified advice on any current issues. Sell semi-finished products of rare and non-ferrous at a competitive price. The products are manufactured on the most modern equipment and meets the quality requirements of Russian state standard and international quality standards. Regular customers receive a discount system of discounts.