Leaf, 36NHTYU5M tape - EP51
International Equivalent
Mark | Analogue | W. Nr. | Aisi Uns | En | Order |
---|---|---|---|---|---|
36НХТЮ5М | EP51 | Delivery from the stock, in stock | |||
36НХТЮ5М-Н-О | EP51 | EP51 | Delivery from the stock, in stock | ||
36НХТЮ5М-Ш-Н-О | EP51 | ~EP51 | Delivery from the stock, in stock |
general characteristics
Mark 36NHTYU5M refers to a precision alloy with desired elastic properties. Used for elastic elements sensitive sensors operating at t ° to 350 ° C. Precision Alloys Group stands out for its exclusive physical and chemical properties (magnetic, thermal, elastic, electric), thanks to the balanced composition, the thoroughness of manufacturing and processing, lack of unnecessary impurities. This group includes high-alloyed iron-based alloys, cobalt, copper, nickel, niobium.
The percentage of
Si | C | Fe | Mn | P | Ni | S | Ti | Mo | Cr | Al |
---|---|---|---|---|---|---|---|---|---|---|
0.3 — 0.7 | 0.05 | 37.01 — 43.7 | 0.8 — 1.2 | to 0.02 | 35 — 37 | to 0.02 | 2.7 — 3.2 | 4 — 6 | 12.5 — 13.5 | 1 — 1.3 |
The physical properties of the alloy 36NHTYU5M.
MPa | hail | 1 / Grad | J / (kg · °) | kg / m3 | W / (m · deg) | Ohm m |
---|---|---|---|---|---|---|
E 10- 5 | T | a June 10 | C | r | l | R September 10 |
1.42 | 20 | 8200 | 420 |
Mechanical properties 36NHTYU5M alloy at a temperature of 20 ° C.
assortment | The size | sT | sre | Eg. | KCU | y | d5 | Heat treatment. |
---|---|---|---|---|---|---|---|---|
- | mm | MPa | MPa | - | kJ / m2 | % | % | - |
Cold-rolled strip, 14 GOST 080−78 | 930 |
designations
Physical properties of the alloy:
Description | designation |
---|---|
— Temperature data acquisition of the alloy [Castle] | — T |
— Modulus of elasticity of the 1st kind, [MPa] | — E |
— Coefficient of linear thermal expansion (at 20 ° C) [1 / deg] | -a |
— The electrical resistance [ohm · m] | -R |
— Specific weight [g / cm3] | -r |
— Thermal conductivity [W / (m · deg)] | -l |
— Specific heat capacity (at 20 ° C) [J / (kg · deg)] | -C |
Mechanical properties:
Description | designation |
---|---|
— The limit of proportionality (the yield strength for the residual strain) [MPa] | sT |
— Short-term strength [MPa] | sre |
— Reduction [%] | y |
— Elongation at break [%] | d5 |
— Brinell hardness in [MPa] | HB |
— Impact strength [kJ / m2] | KCU |
Magnetic properties:
Description | designation |
---|---|
— The coercive force (within) [A / m] | Hc |
— Permeability (max) [mH / m] | Umax |
— Specific losses (maximum) at 50 Hz and 1.0 T. The magnetic flux density [W / kg] | P1.0 / 50 |
— T. Magnetic induction (at least) at a voltage of the magnetic field 100 in a magnetic field [A / m] | B100 |
— The coercive force (not more), [A / m] | Hc |
— Permeability (max) [mH / m] | Umax |
— Specific losses (max) at a frequency of 50 Hz and a magnetic induction of 1.0 T [W / kg] | P1.0 / 50 |
Weldability:
designation | Description |
---|---|
limited weldability | — Needs to preheating t ° 100−120 ° C with a final heat treatment |
no limits | — No need for preliminary heating and final heat treatment |
difficult to weld | — Needs to preheating t ° 200−300 ° C with a final heat treatment |
Supply
All 36NHTYU5M brands presented products are certified. The technical documentation includes data on the chemical composition, limiting the percentage of impurities; mechanical properties of products. We can buy in bulk a variety of semi-finished products for large-scale productions. We also offer good conditions for retail customers. You will be satisfied with the level of service and speed of service.
Buy at a bargain price
The site of LLC «Electrovek-steel» reflects the most current information on the acquisition of precision alloys for today. Experienced managers who are always in touch, ready to provide highly qualified advice on any current issues. We sell semi-finished non-ferrous and rare at a competitive price. Products manufactured at the most modern equipment and meets the requirements of Russian State Standard of quality and international quality standards. Regular customers receive a discount system of discounts.