08KH17N15M3T - эи580 sheet, round, wire
International Equivalent
Mark | Analogue | W. Nr. | Aisi Uns | En | Order |
---|---|---|---|---|---|
08Х17Н15М3Т | EI580 | Delivery from the stock, in stock |
Production and use
Steel 08KH17N15M3T (ЭИ580) refers to high-alloy alloys of the austenitic class. Production is regulated by the following GOST: 18 143−72; 18 907−73; 25 054−81; 5632−72; 5949−75; 7350−77; 9940−81 and 9941−81. Such steel is used in welded structures, working with phosphoric and acetic acid, etc. aggressive environments, in the columns of the synthesis of urea, when using steel with a lower proportion of Nickel causes selective corrosion on sections of S-ferrite.
Percentage composition
C | Cr | Mn | Mo | Ni | Si | Ti |
---|---|---|---|---|---|---|
≤0,08 | 16−18 | ≤2 | 3−4 | 12−14 | ≤0,8 | 0,3−0,6 |
Comparative quality of metal at 20 °C
GOST | Products | Steel grade | σin N/mm2 | δ5, % | σ0,2, N/mm2 | ψ, % |
---|---|---|---|---|---|---|
7350−77 | Hot-rolled sheets | 08KH17N13M2T | 520 | 40 | 200 | - |
7350−77 | Hot-rolled sheets | 08Х17Н15МЗТ | 520 | 40 | 200 | - |
7350−77 | Hot-rolled sheets | 10H17N13MZT | 540 | 37 | 240 | - |
7350−77 | Hot-rolled sheets | 10X17H13M2T | 540 | 37 | 240 | - |
949−75 | Bars | 08KH17N13M2T | 500 | 40 | 200 | 50 |
949−75 | Bars | 08Х17Н15МЗТ | 500 | 35 | 200 | 45 |
949−75 | Bars | 10H17N13MZT | 540 | 40 | 200 | 45 |
949−75 | Bars | 10X17H13M2T | 520 | 40 | 220 | 55 |
5582−75 | Cold-rolled sheets | 10X17H13M2T | 540 | 35 | - | - |
5582−75 | Cold-rolled sheets | 08Х17Н15МЗТ | 540 | 35 | - | - |
5582−75 | Cold-rolled sheets | 10H17N13MZT | 540 | 35 | - | - |
4986−78 | Tape (M) | 10X17H13M2T | 540 | 40 *3 | - | - |
4986−78 | Tape (M) | 10H17N13MZT | 540 | 40*3 | - | - |
9940−81 | Hot-deformed pipes | 08Х17Н13МЗТ | 520 | 35 | - | 8x103 *4 |
9940−81 | Hot-deformed pipes | 10X17H13M2T | 540 | 35 | - | 8х103 *4 |
9941−81 | Cold-deformed pipes | 08Х17Н13МЗТ | 560 | 35 | - | 8x103 *4 |
9941−81 | Cold-deformed pipes | 10X17H13M2T | 540 | 35 | - | 8х103 *4 |
18 143−72 | Wire | 10H17N13MZT | 550−900*1 1100*2 |
|||
18 143−72 | Wire | 10H17N13MZT | 550−900*1 1100*2 |
|||
18 143−72 | Wire | 10H17N13MZT | 550−900*1 1100*2 |
1 Wire in the soft state after the heat treatment.
*2 cold-worked wire.
*3 Given the value δ4.
*4 Density, kg/m .
Physical properties at 20°C
Density 7.9 g/cm3; specific heat 0,504 · 103, j/(kg · K); modulus of elasticity of 20, 3 · 10−4, N/mm2; thermal conductivity 0,147 · 102 W/(m · K); specific electrical resistance of 0,75 Ohm • mm2/m.
Temperature coefficient of linear expansion α
t, °C | From 10 to 100 | From 10 to 200 | From 10 to 300 | From 10 to 400 | From 10 to 500 |
---|---|---|---|---|---|
α · 106, K-1 | 16,5 | 17,5 | 18 | 18,5 | 19 |
Corrosion resistance
GOST: 5582−75, 5949−75, 7350−77, 9940−81, 9941−81 normalized resistance to intergranular corrosion according to method AM and AMU GOST 6032−89 after annealing at t° 650 °C (1 hour). This steel has 1 point of corrosion resistance (less than 0.1 mm/year) in 10% formic acid at 100 °C; 50% citric acid at boiling t º; 5−25% H2SO4 and 75 °C; 50% acetic acid up to 100 °C and 80% up to 80 °C; 25% HPO4 at t º a boil and 40% up to 100 °C., Steel 17−13−2 (3) and 17−15−3 with molybdenum in the composition is more resistant to pitting corrosion in chlorine environments than stainless steel, 18−10. Mo affects the resistance to intergranular corrosion in oxidizing medium.
Treatment
Hot deformation occurs in the interval 1200−850°C. For ingots containing 5-ferrite, t° the beginning of the deformation is reduced. This steel allows a high degree of cold deformation.
Welding
Brands such as 08Х17Н15МЗТ, 08KH17N13M2T, 10X17H13M2T (3T), easy to weld automatic, manual, electric arc and gas methods. For RDS recommended electrodes NZH-13, NIAT-1 EA-400/10U; for automatic — wire SV-04Х19Н11 SV-06Х19Н10МЗТ with fluxes an-26, ANF-6, ANF-14. For ADS, submerged arc welding is used additive SV-01Х19Н18Г10АМ4.
Supply
Entire rental brand 08KH17N15M3T certified. In the technical documentation included data on chemical composition, limiting the percentage of impurities; mechanical qualities of the products. We can buy in bulk any semi-finished products for large-scale production. We also offer optimal conditions for retail customers. A high level of service and speed of service are the face of our company.
Buy at best price
On the website LLC «Electrocentury-steel» reflects the most current information on the acquisition of stainless steel alloys in use today. Experienced managers who are always ready to provide qualified advice on any current issues. Sell semi-finished products of rare and non-ferrous at a competitive price. The products are manufactured on the most modern equipment and meets the quality requirements of Russian state standard and international quality standards. Regular customers receive a discount system of discounts.