Sheet, circle, wire ХН60Ю - ЭИ559А
International Equivalent
| Mark | Analogue | W. Nr. | Aisi Uns | En | Order |
|---|---|---|---|---|---|
| XN60YU | EI559A | 2.4816 | N06600 | NiCr15Fe | Delivery from the stock, in stock |
| XN60YU | EI559A | 2.4851 | N06601 | NiCr23Fe15 | Delivery from the stock, in stock |
| XN60YU | EI559A | 2.4642 | N06602 | NiCr25FeAIY | Delivery from the stock, in stock |
| XN60YU | EI559A | 2.4817 | N06600 | NiCr15Fe | Delivery from the stock, in stock |
Relevance
Heat-resistant heat-resistant alloy CrN60Yu (EI559A) is used in the manufacture of parts for gas pipeline systems, as well as equipment with a brief period of operation at 1250 ° C and a limited period of operation at 1100 ° C.
Percent xcost (GOST 5632-72)
| Si | C | Fe | Mn | P | S | Ni | Cr | Ba | Al | Ce |
|---|---|---|---|---|---|---|---|---|---|---|
| up to 0.8 | to 0.1 | 19.13 - 27.4 | up to 0.3 | up to 0.02 | to 0.02 | 55 - 58 | 15 - 18 | up to 0.1 | 2.6 - 3.5 | up to 0.03 |
Mechanical properties at t° 20 °C.
| Products | Typical grades | Size | d5 | y | in | sT | Thermostat | KCU |
|---|---|---|---|---|---|---|---|---|
| - | - | mm | % | % | MPa | MPa | - | kJ/m2 |
Marking of mechanical properties:
| Description | Designation |
|---|---|
| - Limit of proportionality (yield strength for permanent deformation) [MPa] | sT |
| - Tensile strength [MPa] | sT |
| - Ratio constriction [ % ] | y |
| - Tensile elongation [ % ] | d5 |
| - Brinell hardness, in [MPa] | HB |
| - Impact toughness [ kJ/m2 ] | KCU |
Physical properties of the alloy grade ХН60Ю.
Marking of physical properties:
| Description | Designation |
|---|---|
| - Alloy data acquisition temperature [Grad] | - T |
| - Modulus of elasticity of the 1st kind, [MPa] | - E |
| - Coefficient of thermal linear expansion (at 20°C), [1/Grad] | -a |
| - Specific electrical resistance [Ohm-m] -R | -R |
| - Specific gravity [g/cm3] -r | -r |
| - Heat transfer coefficient [W/(m-grad)] -l | -l |
| - Specific heat capacity (at 20°C), [J/(kg-grad) | -C |
Notations:
Magnetic properties :
| Description | Identification |
|---|---|
| - Coercive force (within) [ A/m] | Hc |
| - Magnetic permeability (not more than) [ MHN/m] | Umax |
| - Losses (not more than) at frequency 50 Hz and 1.0 Tl [ W/kg ] | P1.0/50 |
| - Magnetic induction Tl (not less) at magnetic field strength 100, in magnetic fields [ A/m] | B100 |
| - Coercive force (not less), [ A/m] | Hc |
| - Magnetic permeability (not more than), [ MHN/m] | Umax |
| - Losses (not more than) at frequency 50 Hz and 1.0 Tl [ W/kg ] | P1.0/50 |
weldability:
| Designation | Description |
|---|---|
| Limited weldable | - Must be preheated to 100-120°C with subsequent heat treatment |
| no restrictions | - No need for preheating and final heat treatment |
| Difficult to weld | - Preheating to 200-300°C with final heat treatment necessary |
Delivery
All the presented NP-2 products are certified. The technical documentation includes data on the chemical composition, the limiting percentage of impurities, and the mechanical properties of products. From us you can buy in bulk any semi-finished products for large-scale productions. We also offer optimum conditions for retail buyers. The high level of service and responsiveness of service is the face of our company.
Buy at a favorable price
All nickel alloys sold by Evek GmbH comply with state quality standards. We supply rolled metal products of standard and non-standard sizes in the shortest terms. High quality, reasonable prices and a wide range of products determine the face of our company. Becoming our regular customer, you can count on a system of discount discounts. Cooperation with us will help you realize any engineering plans. We are waiting for your orders on our site.
