Nitronic 60® - Alloy 218 tube
Technical Characteristics
Highly alloyed nickel based austenitic steel (Ni 62-69%) alloyed with titanium, chromium, manganese, molybdenum Demonstrates high resistance to oxidation and chemical corrosion. This is used for low resistance resistors and heated wires.
Percentage composition
Ni | Ti |
Cr | Mn | Mo | C | Si | Al | P | S | Impurities |
---|---|---|---|---|---|---|---|---|---|---|
62-69 | 1.5-3 | 20-22 | ≤4 | ≤2,25 | ≤0,15 | ≤1 | ≤1.25 | ≤0,02 | ≤0,015 | ≤0,5 |
Smelted in an open arc furnace. High strength of semi-finished products is achieved through cold working.
Machining
Turning, milling, grinding, drilling. Good weldability.
Mechanical properties
Designation | Description | MPa |
---|---|---|
s in | Ultimate short-term strength | 530 MPa |
sT | Yield strength (0.2% deviation) | 360 MPa |
d5 | Relative elongation. | 34% |
Application
Automotive valves, brackets, fasteners, including those used in shipbuilding, electrical welding parts. The rod is used for tube welding, Monel® 400, R-405 and K-500 steel grades. Ribbons, for example, are used for heating bimetals. The maximum working temperature in air is 300 °C.
Supplier
We offer to buy tube, nitronic 60 from specialized warehouses of the supplier Evek GmbH with delivery in any city. Full compliance with international quality standards. The supplier Evek GmbH offers to buy pipe, nitronic 60 price - optimal.
Buy, bargain price.
We offer tube, nitronic 60, the price - due to the technological features of production without the inclusion of additional costs. On the website of the company displays information about the latest arrivals of products. It is possible to order rental of non-standard parameters. We have the best price-quality ratio for the whole range of products. In the segment of chrome-nickel steel, Evek GmbH is a profitable supplier.