Relevance

Alloyed brass L96 refers to double deformed brass, as follows from the marking, has a very high percentage of copper in the alloy, about 96%. In a number of pressure-treated alloys, it has a good resistance to corrosion. It is widely used in the production of semi-finished products such as pipes, sheets, profiles used in mechanical engineering, instrumentation, for the manufacture of electrical and heat-exchange equipment.

Production

Chemical composition of L96 grade is normalized according to GOST 15 627-2004. Alloy consists of the following components: main part is copper - 95 - 97%, zinc - 2,66 - 4,8%. The alloying additives are listed in descending order. Iron - 0.1%, antimony - up to 0.005%, lead - up to 0.03%, phosphorus 0.01, bismuth 0.002%, impurities - not more than 0.2%. The alloy melts at 1070 ° C, processed at 700 - 850 ° C, the annealing temperature is 450 - 600 ° C.

Percentage composition of L96 grade (GOST 15 527-2004)

Zn	Cu	Fe	Pb	Sn	P	Bi	Sb	Ni	Impurities
2,66-4,8	95-97	≤0,1	≤0,03	---	≤0,01	≤0,002	≤0,005	---	≤0,2

Advantages

Brass rolling has a number of advantages over more expensive copper. In particular, brass L96 has a high strength, very well deformed in the cold state, not prone to corrosion cracking; it is used for stamping, forging, enameling. The mechanical strength at t ° 20 ° C: Pressed tube (GOST 617 - 2006) has _ѕv 180 - 190 MPa, _d5 32%; soft alloy _ѕv = 220 - 260 MPa, _d5 45 - 55%; and hard alloy _ѕv = 420 - 480 MPa, _d5 1 - 3%.

Buy at a bargain price

Evek GmbH has a wide range of non-ferrous alloys in stock at the best price. The choice satisfies any customer. Brass rolling grade L96 is supplied in wholesale and retail. The popularity of products from this alloy is due to the huge variety and excellent quality of products. All products of our company are manufactured under full control of the technological chain, which provides a 100% quality guarantee. We are ready to deliver products of non-standard parameters on an individual order. Technological capabilities at the stages of production allow for individual orders in the absence of the basic version of the required type of product. Lead times are minimal. The price depends on the delivery volume and additional terms of realization. Flexible system of discounts for wholesale orders.