Punch-11 Wire
International Equivalent
Mark | Analogue | W. Nr. | Aisi Uns | En | Order |
---|---|---|---|---|---|
ПАНЧ-11 | Delivery from the stock, in stock |
general characteristics
Manufacturing wire Panch-11 normalized 1842−118−195 430−2002 TU TU 48−21−593−85. This wire is needed for the repair of broken parts, cracks, holes worn. The composition of the wire contains special elements that protect the weld pool from oxidation, uluchayuschie seam weld strength and reduce stress after welding. The weld metal is exposed after cooling tooling. Wire diameter 1,2 mm ± 0,06 mm. Consisting of: nickel, copper, iron, manganese, silicon and impurities, and carbon. It comes in unannealed (solid) state.
Chemical composition
alloy Brand | nickel | manganese | copper | iron | the amount of REM | silicon | carbon | amount remaining |
---|---|---|---|---|---|---|---|---|
Panch-11 | the basis | 5−6 | 2.3−3 | 2 | 0.2−0.4 | 0.3 | 0.3 | 0.3 |
Using
Repair of the equipment of ductile iron. For cold welding using Panch-11 thin wire on a nickel basis. The MIG open arc, weld pool do not protect flux or gas. Low heat input enables extended seams without a long break in the cooling of parts. This wire is easy to fix a defect in the cast-iron parts in the most remote place, broken off pieces to cook, make a hole. After cooling, the weld metal is treated. The absence of residual voltage, the item does not warp. Since the composition of the wire is doped by special additives are not required in the welding applications protective gas. When welding cast iron bleaching occurs. Cast iron, heating, quickly changes from solid to liquid, it is important that during cooling, he is not prone to cracking. To improve the reliability of the connection edge of the cracks can be further connected with threaded studs.
dignity
Wire Panch-11 facilitates welding and improves the quality of the connection, the load-bearing parts after recovery. Significantly increases welding speed. facilitated preparatory and concluding work. At the same time the possibility of repair parts is greatly enhanced. reduced consumption of welding material, when compared with the conventional manual welding. 1 kilogram of wire Panch-11 restores more than 20 hull thin-walled parts.
Supply
We deliver certified welding wire of any brand. The technical documentation included data on the percentage composition and quality electrical products. We easily buy wholesale any semi-finished products for large-scale productions. We also work with retail buyers. High level of service and efficiency of service are the face of our company.
Buy at a bargain price
The site of LLC «Electrovek-steel» reflects the most current information on the acquisition of wire Panch-11 today. Our best managers are ready to provide highly qualified advice on any current issues. We sell semi-finished non-ferrous metals at a competitive price. Products manufactured at the most modern equipment and meets the requirements of Russian State Standard of quality and international quality standards. All products are ultrasonic inspection for defects. Regular customers receive a discount system of discounts.