Metal hose fittings - cone angle 74°
Relevance
Metal hose fittings with Union nut cone angle 74 is used to connect pipelines with a small diameter or for attaching various units to the pipeline in a short time. Metal hose with Union nut cone angle 74 is a stainless steel bellows hose stainless metal braided from one or two layers. To mount the hose cone with an angle of 74″ a fairly standard tool for tightening the nut. Main criteria increase the service life of the metal hoses is professional installation and proper operation of the pipeline.
Dy | d | d1 | d2 | d3 | D | S | Working pressure (kg/cm2) | Min. bending radius (stat.), mm | flexible part 1 m | Fittings 2 ends, kg |
---|---|---|---|---|---|---|---|---|---|---|
6 | 4 | 10,5 | M14x1 5H6H | 11,5 | 19,6 | 17 | 100 | 25 | 0,32 | 0,1 |
6 | 4 | 10,5 | M14x1 5H6H | 13,0 | 19,6 | 17 | 280 | 25 | 0,48 | 0,1 |
8 | 6 | 12,5 | M16x1 5H6H | 13,5 | 21,9 | 19 | 100 | 35 | 0,39 | 0,11 |
8 | 6 | 12,5 | M16x1 5H6H | 15,0 | 21,9 | 19 | 280 | 35 | 0,57 | 0,11 |
10 | 8 | 15,5 | M20x1,5 5H6H | 16,0 | 27,7 | 24 | 100 | 40 | 0,47 | 0,16 |
10 | 8 | 15,5 | M20x1,5 5H6H | 17,5 | 27,7 | 24 | 280 | 40 | 0,8 | 0,16 |
12 | 10 | 17,5 | M22x1,5 5H6H | 18,0 | 31,2 | 27 | 100 | 45 | 0,55 | 0,2 |
12 | 10 | 17,5 | M22x1,5 5H6H | 19,5 | 31,2 | 27 | 45 | 210 | 0,87 | 0,2 |
14 | 12 | 19 | M24x1,5 5H6H | 21,0 | 31,2 | 27 | 45 | 100 | 0,61 | 0,26 |
14 | 12 | 19 | M24x1,5 5H6H | 23,5 | 31,2 | 27 | 45 | 210 | 1,15 | 0,26 |
16 | 14 | 22 | M27x1,5 5H6H | 24,5 | 34,6 | 30 | 100 | 68 | 1,2 | 0,32 |
16 | 14 | 22 | M27x1,5 5H6H | 26,5 | 34,6 | 30 | 68 | 210 | 1,38 | 0,32 |
20 | 18 | 27,5 | M33x2 | 28,0 | 41,6 | 36 | 45 | 70 | 0,6 | 0,41 |
20 | 18 | 27,5 | M33x2 | 29,0 | 41,6 | 36 | 70 | 100 | 1,3 | |
20 | 18 | 27,5 | M33x2 | 31,5 | 41,6 | 36 | 210 | 70 | 2 | 0,45 |
25 | 23 | 33,5 | M39x2 | 33,5 | 53,1 | 46 | 45 | 85 | 0,7 | 0,69 |
25 | 23 | 33,5 | M39x2 | 34,5 | 53,1 | 46 | 85 | 100 | 1,67 | |
25 | 23 | 33,5 | M39x2 | 36,5 | 53,1 | 46 | 210 | 85 | 2,2 | 0,71 |
32 | 30 | 43 | M48x2 | 42,5 | 63,5 | 55 | 45 | 105 | 1,3 | 1,26 |
32 | 30 | 43 | M48x2 | 43,5 | 63,5 | 55 | 100 | 105 | 2,1 | 1,26 |
32 | 30 | 43 | M48x2 | 49,5 | 63,5 | 55 | 210 | 105 | 4,5 | 1,26 |
Use
The metal sleeve is a sealed flexible corrugated pipes, which are covered by the built-in end fittings and braided hose. Applied to compensate temperature and Assembly deformations of pipelines.
Metal hose use for transporting different environments, including explosive and aggressive, almost all industries. Metal hose can be connected to any piping components. Metal hoses are different sizes: diameter 6 — 350mm, length 2500 — 6000 mm.
Metal hose fittings — cone angle 74 is intended to compensate for thermal, axial expansion and also to absorb vibrations and oscillations of the pipeline. All elements of the thread of the metal hoses manufactured from stainless steel or alloy steel grade St. 20.
Such metal hose with threaded connection stainless steel are used for transferring gaseous and liquid media under high and low pressure and vacuum systems.
Metal hose Н8Д0 .449. 033 SRGS fittings with Union nut cone angle 74.
Sealed metal high-pressure hose brand Н8ДО type SRGS (helical corrugations of the steel tape) is an end of the connecting fittings in the form of a cap nut-type cone with an angle of 74°.
The main application of this metal hose is a permanent or a temporary convergence of the various components located at pipeline nodes of small diameter, in places where welding work is not rational. To the flexible sleeve series Н8Д0 swivel nut attached using argon arc welding and tightness of the flexible hose of the type SRGS with hard tubing, is carried out using special nuts, which is made at an angle of 740.
Metal hose 4600А the type of RGTA fittings with Union nut cone angle of 74
Sealed sleeve with a helical corrugated pipe, welded using TIG welding for the type of RGTA with swivel nut, made at an angle of 740, used mainly in pipeline nodes of small diameter or nodes interfacing various units where welding work is not rational. To mount the hose cone with an angle of 74″ a fairly standard tool for tightening the nut.
Note
— specified operating pressure (P slave), given in accordance with the temperature of 20 °C.
— Metal hoses with end fittings are manufactured from flexible one-piece part, the length of which is 25 m.
Buy at best price
In stock, LLC «Electrocentury-steel» a wide range of steel products. We offer the most favorable conditions for wholesale and retail buyers. Products are certified. On our website You will find all the necessary information Our online consultant is always ready to answer your questions. The Internet address of the company: evek.org. We guarantee high quality and promptness of deliveries. On bulk orders discounts are available.