Molybdenum alloys
International Equivalent
| Mark | Analogue | W. Nr. | Aisi Uns | En | Order |
|---|---|---|---|---|---|
| MCHVP | Delivery from the stock, in stock |
Technical characteristics
Molybdenum belongs to the group of the most refractory metals, Molybdenum alloys are characterized by particular elasticity, strength, low expansion coefficient, resistance to thermal shocks. Under normal conditions, this metal does not react with chemicals, its electrical conductivity is better than that of iron.
Physical properties (temperature 20°C)
| Characteristic | Value |
|---|---|
| Density Mo [g/cm3] | 10,22 |
| Melting point | 2620 °C (2890°K) |
| Boiling point | 4639 °C |
| Thermal conductivity [W/(m-K) | 138 |
| Oxidation grades | 6, 5, 4, 3, 2 |
| Specific heat of fusion | 28 kJ/mol |
| Mo | Fe | Si | O | C | Ni | Al | Ca | Mg |
|---|---|---|---|---|---|---|---|---|
| basis | ≤0.01 | ≤0.01 | ≤ 0.008 | ≤0.005 | ≤0.004 | ≤0.004 | ≤0.003 | ≤0.002 |
Application of MF alloy: parts of electric vacuum devices, wire for production of electronic devices and light sources.
| Mark | Si | Ca+Mg | Al+Fe | Ni | H | O | C | Ti | B | N |
|---|---|---|---|---|---|---|---|---|---|---|
| PMWP | 0,014 | 0, 0,005 | 0,018 | 0,005 | 0,001 | 0,0050 | 0,030 | 0,008 | ||
| MBVP | 0,014 | 0,005 | 0,018 | 0,005 | 0,003 | 0,0050 | 0,0050 | 0,07 | 0,005-0,025 | 0,008 |
- MRN percentage composition
GOST 27266-87 Mo min 99.92%
| Mo | Impurities |
|---|---|
| base | ≤ 0.08 |
MRN alloy application manufacture of wire intended for production of electronic devices and light sources:
Other alloys
MK is alloyed with 0.5% silicon. CM - zirconium and/or titanium are used as an additive. MR - alloyed with rhenium. MB - alloyed with tungsten.
Supplier
Supplier Evek GmbH offers to buy molybdenum alloy, the price is optimal in this segment of rolled products. Full compliance with modern quality standards. We offer to buy molybdenum alloy from specialized warehouses of the supplier Evek GmbH with delivery in any city.
Buy, favorable price
We offer molybdenum alloys, the price is determined by the technological features of production without the inclusion of additional costs. Products with non-standard parameters can be ordered. In the refractory metals segment, Evek GmbH is a profitable supplier.
