Tape, a circle, an alloy 32NK - EP475vi

International Equivalent

Mark	Analogue	Order
32НК	EP475	Delivery from the stock, in stock
32НКД	EI630A	Delivery from the stock, in stock
32НКА		Delivery from the stock, in stock

Relevance

Precision 32NK-VI alloy with a predetermined thermal coefficient of linear expansion is used for parts with a polished surface, or for connection with a soft glass has a temperature coefficient of linear expansion coefficient of linear expansion 1 1,5x10−6 / ° C in the temperature range from -60 to + 100 ° FROM. The alloy has unique physical and technical characteristics (magnetic, thermal, elastic, electric), thanks to the accuracy of the composition, manufacture and thoroughness of treatment, lack of unnecessary impurities. Such alloys are melted in a special induction furnaces, and then subjected to pull the shoes ingots or rental.

application

The scope of precision instrumentation, innovative technologies, production of precise electronic sensors, home appliances, laser optics, metrology measuring equipment, memory components of computers, microphones core, magnetic antennas.

alloy Brand	Classification of alloy	Using
32NK-VI	The precision alloy with a predetermined temperature coefficient of linear expansion	Alloy 32NK-VI is used for parts with polished surface; for a soft glass with a compound; TKLRx1000000 temperature range -60 to +20 and +20 +100 ° C not more than 1.5 [1 / ° C]

The percentage of

Mn	Si	C	Ni	Cr	P	S	Co
to 0.4	0.3	to 0.03	31.5 — 33	0.1	to 0.015	to 0.015	3.7 — 4.7

designations

Physical properties of the alloy:

Description	designation
— Temperature data acquisition of the alloy [Castle]	— T
— Modulus of elasticity of the 1st kind, [MPa]	— E
— Coefficient of linear thermal expansion (at 20 ° C) [1 / deg]	-a
— The electrical resistance [ohm · m]	-R
— Specific weight [g / cm3]	-r
— Thermal conductivity [W / (m · deg)]	-l
— Specific heat capacity (at 20 ° C) [J / (kg · deg)]	-C

Mechanical properties:

Description	designation
— The limit of proportionality (the yield strength for the residual strain) [MPa]	sT
— Short-term strength [MPa]	sre
— Reduction [%]	y
— Elongation at break [%]	d5
— Brinell hardness in [MPa]	HB
— Impact strength [kJ / m2]	KCU

Magnetic properties:

Description	designation
— The coercive force (within) [A / m]	Hc
— Permeability (max) [mH / m]	Umax
— Specific losses (maximum) at 50 Hz and 1.0 T. The magnetic flux density [W / kg]	P1.0 / 50
— T. Magnetic induction (at least) at a voltage of the magnetic field 100 in a magnetic field [A / m]	B100
— The coercive force (not more), [A / m]	Hc
— Permeability (max) [mH / m]	Umax
— Specific losses (max) at a frequency of 50 Hz and a magnetic induction of 1.0 T [W / kg]	P1.0 / 50

Weldability:

designation	Description
limited weldability	— Needs to preheating t ° 100−120 ° C with a final heat treatment
no limits	— No need for preliminary heating and final heat treatment
difficult to weld	— Needs to preheating t ° 200−300 ° C with a final heat treatment

Supply

All products are brand 32NK-VI certified. The technical documentation includes data on the chemical composition, limiting the percentage of impurities; mechanical properties of products. We can buy in bulk a variety of semi-finished products for large-scale productions. We also offer good conditions for retail customers. You will be satisfied with the level of service and speed of service.

Buy at a bargain price

In stock company «Electrovek-steel» is represented by a diverse range of precision alloys. We supply certified products of domestic and foreign manufacturers. We appreciate time of our clients, so always happy to provide expert help with the selection. It offers experienced management consultants. Product quality is guaranteed by strict observance of the norms of production. Execution of orders takes minimal time. Wholesale customers discounts.