10x11n23t3mr - ep33 wire, round, hexagon
International Equivalent
| Mark | Analogue | W. Nr. | Aisi Uns | En | Order |
|---|---|---|---|---|---|
| 10x11n23t3mr | EP33 | Delivery from the stock, in stock |
Technical specifications
Stainless heat-resistant high-alloy chromium-nickel steel. Base - iron (Fe about 62%). Specific gravity 7.9 / cm3. The alloy is additionally alloyed with manganese, molybdenum, titanium, aluminum and boron, combines corrosion resistance, spring properties and high wear resistance.
Percentage composition (GOST 5632−72)
| Fe | WITH | Al | Mn | Si | Mo | You | Ni | P | S | Cr | B |
|---|---|---|---|---|---|---|---|---|---|---|---|
| basis | ≤0.1 | ≤0.8 | ≤0.6 | ≤0.6 | 1 - 1.6 | 2.6 - 3.2 | 21 - 25 | ≤0.025 | ≤0.01 | 10 - 12.5 | ≤0.02 |
Austenitic steel grade.
Mechanical properties (temperature 20°C)
| Assortment | GOST | s in | s T | d 5 | y | KCU | Heat treatment |
|---|---|---|---|---|---|---|---|
| - | MPa | MPa | % | % | kJ/ m2 | - | |
| Rod, | 5949−75 | 880−980 | 590−685 | 8-10 | 10-12 | 290 | Hardening and aging |
s T - Proportional limit (yield limit for residual deformation)
s in - Short-term strength limit
d 5 - Relative elongation at break.
Cold processing
Turning, milling, grinding, drilling.
Heat treatment
Normalization, hardening, annealing, tempering.
Application
Springs and fasteners with limited service life at temperatures up to 700°CSupplier
We offer to buy wire, hexagon 10x11n23t3mr, ep33 from specialized warehouses of the supplier Evek GmbH with delivery to any city. Full compliance with international quality standards. The supplier Evek GmbH offers to buy wire, hexagon 10x11n23t3mr, ep33, the price is optimal in this segment of rolled products.
Buy, good price
We offer wire, hexagon 10x11n23t3mr, ep33, price - is determined by technological features of production without including additional costs. You can order products of non-standard parameters. In the segment of austenitic steel, Evek GmbH is a profitable supplier.