Manufacturing

An aluminum T-bar is a solid profile with a cross-section resembling the letter "T". An aluminum T-bar has no hollow interior, manufactured in accordance with GOST 22 233-93 and 8617-81 from aluminum alloys and aluminum. Chemical composition is normalized by GOST 4784. For the production of aluminum beams are often used alloy grades AD31, 1915. To increase the service life of the aluminum T-beam it is covered with powder polymeric or anodic oxide coating. Dimensions of the aluminum TAB is given by the height of the TAB, the thickness of the shelf, the width of the shelf, expressed in mm.

A T-beam differs from a T-beam in that it has one additional upper flange, due to which, its cross-section shape corresponds to the letter "H". Dimensions of aluminum I-beams are given by the height of the TAB, the width of its lower flange, the thickness of the upper shelf and its width, expressed in mm. The length of the aluminum I-beam and T-beam is 1 - 6.7 linear meters.

Classification

by processing:

- without heat treatment;

- annealed - M;

- naturally aged and hardened - T;

- artificially aged and hardened - T1;

- Not fully hardened and artificially aged - T4;

- incompletely hardened and artificially aged - T5.

section shape:

- I-beam profile - I-beam aluminum profile;

- single T-profile.

Depending on the length of the workpiece:

- TAB of multiple measured (300mm) length;

- of off-gauge length;

- full-length.

According to the accuracy of production:

- normal accuracy - H;

- high accuracy - B;

- Increased accuracy - P.

According to the type of coating:

- two-layer complex coating K;

- polymer powder coating P;

- anodized corners - AN;

- electrophoretic coating ZH;

- paint and varnish coating ZHL.

By strength:

- increased strength - PP;

- high strength;

- normal strength.

Application

Aluminum I-beams are now widely used in the construction of floors, bridges. TABs and aluminum I-beams are also used in car building and automotive industry.

Example designation:

Aluminum Taurus of the alloy brand AD31, in artificially aged and hardened state, length 6000 mm, size 15x20x2mm: Taurus AD31T1 15x20x2x6000 GOST 22 233-93.

Dimensions of aluminum T-beam

Buy at a bargain price.

Aluminum Taurus according to GOST 22 233-93, sold by Evek GmbH, meet the highest requirements. The popularity of products made of aluminum, due to the highest quality products, its real price and variety. All products made of aluminum alloys are manufactured by our company under the absolute control of the current stages of the production chain, providing a one hundred percent quality guarantee. Evek GmbH has the ability to produce high quality products with non-standard parameters according to individual orders. Technological capabilities at each stage of production allow to ensure the production of steel products for individual orders in case of the lack of the necessary type of product in the basic version.