10g2 - 10g2 - aisi 1513 pipe, circle, rod

International Equivalent

Mark Analogue W. Nr. Aisi Uns En Order
10g2 1513 10g2 Delivery from the stock, in stock

Would you like to buy low-carbon structural steel with high manganese content in grades 10G2, 10g2, AISI 1513? Evek GmbH offers pipes, bars, rounds of these steels at the manufacturer's price and with delivery of products to the desired address

Evek GmbH offers a wide range of products - rod, round and tube of manganese structural steel 10G2, 10g2, AISI 1513. Economically advantageous price from the manufacturer. Supplier provides strict adherence to the range of profiles and sizes of rolled products, as well as ensures its delivery to any location specified by the customer.

Chemical composition

10G2 steel in CIS countries is produced in accordance with the requirements of GOST 4543. The steel has the following chemical elements:

  • Carbon - 0.07...0.15%;
  • Silicon - 0.17...0.37%;
  • Manganese - 1,20 ... 1,60%.

As metallurgical impurities are also sulfur and phosphorus, the percentage of which can not be higher than 0.035%. Traces of nickel, chromium and copper are allowed.

The closest European analogue of 10G2 is 10g2 steel of the same composition, melted in Poland according to the national standard. The AISI 1513 steel is produced in the USA under UNS G15130. It has 0.12...0.16% carbon and 1.10...1.40% manganese. Steel content of silicon is not regulated, and impurities - phosphorus and sulfur - should be not more than 0,04 and 0,05% respectively.

Company Evek GmbH offers to buy bars, rounds and tubes made of structural steel 10G2, 10g2, AISI 1513 with increased manganese content. The price is from the manufacturer. The supplier guarantees the quality of the supplied rolled products, as well as its timely delivery to the consumer.

Properties and application

These steels are produced in a wide range of profiles and designed for the production of fasteners and other products, which are used at high specific loads. The steels have high cold resistance that lasts to -650...-700 C.

After quenching and tempering these steels have the following mechanical properties:

  • Tensile strength, MPa - 430;
  • yield strength, MPa - 250 MPa;
  • Relative elongation, % - 22;
  • Relative narrowing, % - 45.
  • Young's modulus, GPa - 190 ... 210.

Buy bar, rounds, tubes of structural steel 10G2, 10g2, AISI 1513 offers the company Evek GmbH. Supplier sells products at manufacturer's price, ensuring its timely delivery to the address indicated by the customer.