03N18К8М5Т - aisi 321 sheet, round, wire

International Equivalent

Mark	Analogue	W. Nr.	Aisi Uns	En	Order
03Н18К8М5Т	EK19				Delivery from the stock, in stock

The production and use of

Brand 03Н18К8М5Т-VD smelted in an open induction furnace using a vacuum-arc remelting, according to the 14−1-3140−81; 14−1-4479−88. Used for loaded parts, axles, fasteners, fittings, pressure vessels. Due to the alloying elements, the surface of the material when in contact with atmospheric air is covered by a solid film of oxide nature, which protects the product from harmful influence of aggressive environment. Nickel gives the composition ductility, molybdenum and cobalt — resistance, additives of silicon and manganese improve the workability of the material.

Percentage composition

Al	C	Co	Fe	Mn	Mo	Ni	P	S	Si	Ti
≤0,15	≤0,03	7,5−8,5	DOS.	≤0,1	4.2−5V	Of 17.7−19	≤0,01	≤0,01	≤0,1	0,2−0,4

Installed mechanical characteristics at 20 °C (after aging and quenching)

TU	Product type	σв, N/mm2	ψ,%	KCU, j/cm2
THAT 14−1-4479−88	Rod:	-	-	-
THAT 14−1-4479−88	The longitudinal samples	1570	50	49
THAT 14−1-4479−88	Samples of the cross	1570	50	34

Mechanical characteristics at low and high temperatures
(rod, ∅, □ 70−100 mm)

tисп, °C	E · 10−4, N/mm2	σв, N/mm2	σ0,2, N/mm2	σпу, N/mm2	δ5, %	ψ,%
-196	-	1900	1800	1700	7	40
-130	-	1800	-	-	7	50
-70	20,25	1700	1600	1300	8	50
20	19,00	1600	1550	1300	9	55
200	17,50	1450	1400	1100	9	55
300	16,40	1400	1300	1100	10	55
400	-	1300	1200	1050	8	50

Delivery

Stripes and bars supply without heat treatment. Technical documentation for non-standardized supplements (in points): 1−2 sulphides, silicates 1−2,5, nitrides 1,5−3,0, oxides 1−2 according to GOST 1778−70; size of austenitic grain of not less than 5-th point according to GOST 10 234−75. Submitted to the rental brand 03Н18К8М5Т-VD certified. In the technical documentation included data on chemical composition, limiting the percentage of impurities; mechanical qualities of the products. We can buy in bulk any semi-finished products for large-scale production. We also offer optimal conditions for retail customers. A high level of service and speed of service are the face of our company.

Buy at best price

In stock company «Elektrovek-steel» always in stock products from stainless steel alloys at a reasonable price. It is based bets on European non-ferrous metals without incorporating extra cost. Supply certified products of domestic and foreign manufacturers. Cooperation with us gives a number of advantages. Our experts will be happy to provide advice in the purchase of any of the alloys, the correct choice of which will depend on the performance and durability of equipment. We will help to determine not only the optimal parameters of the product, but also offer the best price.