AlMg6 / AMg6 Aluminum Sheet, Strip and Tube
International Equivalent
| Mark | Analogue | W. Nr. | Aisi Uns | En | Order |
|---|---|---|---|---|---|
| AMG6 | AlMg6 | Delivery from the stock, in stock |
AlMg6 / AMg6 aluminum-magnesium products
AlMg6, also written AMg6, is an aluminum-magnesium alloy designation used for corrosion-resistant wrought products. The governing standard, temper and exact product form must be stated because similar designations are not automatically interchangeable.
Technical characteristics
Aluminium wrought alloy with high corrosion resistance. Well amenable to hot or cold deformation. Hardness HB 10 -1 = 65 MPa
Percentage composition (GOST 4784-97)
| Fe | Si | Mn | Ti | Al | Cu | Be | Mg | Zn | Impurities |
|---|---|---|---|---|---|---|---|---|---|
| ≤0.4 | ≤0.4 | 0.5 - 0.8 | 0.02 - 0.1 | 91.1 - 93.68 | ≤0.1 | 0.0002 - 0.005 | 5.8 - 6.8 | ≤0.2 | ≤ 0.1 |
| Range | GOST | s in | sT | d5 |
|---|---|---|---|---|
| - | MPa | MPa | % | |
| Tubes | 18482-79 | 315 | 145 | 15 |
| Tungsten carbide-tipped tape | 13726-97 | 375 | 275 | 6 |
| Annealed tape | 13726-97 | 305-315 | 145-155 | 15 |
| Plate | 17232-99 | 275-305 | 130-145 | 4-11 |
| t° | E 10- 5 | a 10 6 | l | r | C | R 10 9 |
|---|---|---|---|---|---|---|
| Degree | MPa | 1/Gradus | W/(m-degree) | kg/m3 | J/(kg-radius) | Ohm-m |
| 20 | 0.71 | 2640 | 67.3 | |||
| 100 | 24.7 | 122 | 922 |
Sv - Ultimate Short-Term Tensile Strength
sT - Limit of proportionality (yield strength for permanent deformation)
d5 - Tensile elongation at break.
HB - Brinell hardness
E - Modulus of elasticity of the first kind
C - specific heat capacity
Storage
Stored in covered or roofed warehouses, with adequate protection against mechanical and other types of damage.
Cold processing
The material is very technological. Easy to plastic deformation, turning, milling, grinding, drilling.
Information required for a quote
State whether sheet, strip or tube is required, the governing standard, alloy designation, temper, thickness, width and length or OD and wall, tolerances, quantity and inspection-document requirements.
Related AlMg6 products
See AlMg6 wire and bar, AMg6 coil, square and plate and AMg6 / 1560 material data.
Request a U.S. quote
Evek LLC serves customers throughout the United States. Typical delivery is 2–3 weeks, subject to specification, temper, dimensions and availability.
Contact Evek LLC with the complete requirement and delivery ZIP code.