Stainless tees

International Equivalent

Mark Analogue W. Nr. Aisi Uns En Order
12X18H10T EP2 1.4541 321 X12CrNiTi18-10 Delivery from the stock, in stock
03Х18Н11 1.4306 304L X2CrNi19-11 Delivery from the stock, in stock
04Х18Н10 EI842 1.4307 304L X2CrNi18-9 Delivery from the stock, in stock

General Characteristics

Stainless steel T-pieces are needed to separate and change the direction of flow in the pipeline. Straight tees have all sockets of the same diameter, while transition tees have a socket that is perpendicular to the main flow and has a smaller diameter.

Production and use

Domestic stainless steel tees are made stamped seamless. They are welded to the pipeline. Their thick walls are designed for pressure up to 100 atm, and t ° -70 ° C to +450 ° C (depending on the steel grade). But if it is a low-pressure pipeline made of imported stainless pipes, then imported stainless tees are applicable. They are made of electric-welded pipes with wall thickness up to 2 mm for pipes of small diameters and up to 4 mm for large pipes. Steel grades are used: 08X18H10T, 10X17H132M2T, 12X18H10T, 304 AISI, 316 AISI.

Steel C Cr Fe Ni Ti Mn P S Si Impurities
12CR18NI10T ≤0,12 17-18 Osn. 9-10 ≤0,8 ≤2 ≤0,03 ≤0,02 ≤0,8 ≤0,15

Percentage composition 304 L

AISI C Cr Fe Ni V Mn P S Si Impurities
304 L ≤0,03 18-20 Os. 8-12 --- ≤2 ≤0,045 ≤0,03 ≤1 ≤0,15

Stainless steel tees with threaded connections are designed for sanitary installations. Use steel grade 316 AISI... At the ends of tees - internal thread (type BP-BP-BP). Diameters of threaded stainless tees from DN 6 (1/8″) to DN100 (4″).

Buy at a bargain price

In stock Evek GmbH a wide range of pipeline fittings and stainless T-pieces. We offer the best conditions for wholesale and retail buyers. Products are certified. On our site you will find all the necessary information, Our online consultant is always ready to answer any questions. Internet address of the company:. We guarantee high quality and on-time delivery. At wholesale orders a system of discounts.