X12F1 Tool Steel Bar, Rod and Forgings

Percentage composition, GOST 5950−2000

Fe	C	Si	Mn	Ni	S	P	Cr	V	Cu
basis	1.25 — 1.45	0.1 — 0.4	0.15 — 0.45	≤0.4	≤0.03	≤0.03	11 — 12.5	0.7 — 0.9	≤0.3

Tool steel. Hardness after annealing HB 10 -1 = 255 MPa. Not applicable for welded constructions Not prone to temper embrittlement.

Application

Reference gears, knurling dies, drawing dies, complex shaped profile rollers, sections of complex shaped car body dies, complicated hole punching dies for sheet metal forming, dies and punches of punching and punching dies with complicated configuration of working parts, cold extrusion punches and dies working at up to 1600 MPa pressure.

Analogues

Austria	England	Germany	EU	Spain	Italy	GOST	USA	France	Sweden	Japan
ONORM	BS	DIN, WNr	EN	UNE	UNI	GOST	aisi	AFNOR	SS	JIS
BOHLERK110	BD2	X155CrVMo12−1		X160CrMoV12	X155CrVMo12−1KU	X6VF	D5	X160CrMoV12	2310	SKD11
						X6V3FM	T30402

X12F1 tool steel ordering details

X12F1 designations and proposed equivalents must be checked against the governing standard for each order. Specify bar, rod or forging dimensions, condition, tolerances, heat-treatment requirements, quantity and inspection documentation. Technical values and analogues on this page are reference information; the purchase specification and certified mill test report control the order.

Related tool steel

See the existing X6VF / X100CrMoV5-1 bar and forgings page.

Request an X12F1 quote

Send Evek LLC the governing standard, dimensions, condition, quantity, documentation and delivery ZIP code. Typical delivery across the United States is 2–3 weeks, subject to specification and availability.

Contact Evek LLC to request availability and pricing.