Grade 5 Titanium - 3.7165 - Titanium 6Al-4V tube
International Equivalent
| Mark | Analogue | W. Nr. | Aisi Uns | En | Order |
|---|---|---|---|---|---|
| BT6 | 3.7165 | R56200 | 6AL4V | Delivery from the stock, in stock | |
| Vt6s | Delivery from the stock, in stock | ||||
| Tue6h | Delivery from the stock, in stock |
Technical characteristics
This grade is a widely demanded alloy. Titanium Ti6Al4V, which is used for the production of semi-finished products of high specific strength. The specific gravity is 4.43 g/cm3. The alloy is almost twice as light as steel, but not much inferior to it in strength. This material is used in aerospace, medical, marine and chemical industries.
Percentage composition
| Ti | C | Fe | N | Al | O | V | H | Y | Impurities |
|---|---|---|---|---|---|---|---|---|---|
| basis | ≤ 0.08 | ≤ 0.03 | ≤ 0.05 | 5.5-6.75 | ≤ 0.2 | 3.5-4.5 | ≤ 0.015 | ≤ 0.005 | ≤ 0.4 |
Mechanical properties (t° 20°C)
| Range | s in | sT | d5 | y | KCU | Heat treatment |
|---|---|---|---|---|---|---|
| - | MPa | % | % | kJ/m2 | - | |
| Forging | 1000 | 910 | 18 | |||
| Alloy deformed | 1110 | 970 | 15 | 17 | 500 | Annealing |
| Casting | 1000 | 895 | 5 |
sB - Ultimate short-time strength
sT - limit of proportionality (yield stress for permanent deformation)
d5 - Tensile elongation at break
HB - Brinell hardness.
Cold working
Turning, milling, grinding, drilling.
Heat treatment
Normalizing, hardening, annealing, tempering.
Supplier
We offer to buy Grade 5 Titanium tube - 3.7165 - Titanium 6Al-4V from the specialized depots of the supplier Evek GmbH with delivery in any city. Full compliance with international quality standards. The supplier Evek GmbH offers to buy Grade 5 titanium tube - 3.7165, the price is optimal in the given segment of rolled products.
Buy, bargain price
We offer the pipe Grade 5 titanium - 3.7165 - Titanium 6Al-4V, price - determined by the technological features of production without including additional costs. On the website of the company displays information on the latest arrivals of products. It is possible to order products with non-standard parameters. We have the best price-quality ratio for the whole range of products. In the segment of titanium alloys Evek GmbH is a profitable supplier.