as35g2 - 36smnpb14 - 1.0765 pipe, round, bar
International Equivalent
| Mark | Analogue | W. Nr. | Aisi Uns | En | Order |
|---|---|---|---|---|---|
| ac35g2 | 1.0765 | 36smnpb14 | Delivery from the stock, in stock |
Evek GmbH offers to buy tubes, bars and rounds of medium-carbon structural steels of high machinability grades AC35G2 and 36SMnPb14 (1.0765). The rolled steel is sold at a favourable price from the manufacturer. The supplier guarantees the compliance with the range of supply, as well as the prompt transportation of products to the customer.
Chemical composition
Automated steel AS35G2 is produced by domestic metallurgical companies in accordance with the technical requirements
| Element | Carbon | Silicon | Manganese | Chrome | Nickel | Copper | Lead | Sulfur |
|---|---|---|---|---|---|---|---|---|
| Content in steel, % | 0,32...0,39 | 0,17...0,37 | 1,35...1,65 | Up to 0.25 | Up to 0.25 | Up to 0.25 | 0,15...0,30 | 0,08...0,13 |
Phosphorus (maximum 0.04%) is permitted as a metallurgical impurity.
The steel 36SMnPb14 (1.0765) produced in Europe according to European standards EN 10277 and EN 10087 is considered to be the closest analogue of this steel. Its chemical composition is as follows:
| Element | Carbon | Silicon | Manganese | Sulfur | Phosphorus | Lead |
|---|---|---|---|---|---|---|
| Content in steel, % | 0,32...0,39 | Not more than 0.40 | 1,30...1,70 | 0,10...0,18 | Not more than 0.04 | 0,17...0,35 |
Company Evek GmbH offers to buy a tube, bar, a circle of high machinability automotive steel grades AC35G2 and 36SMnPb14 (1.0765). The advantageous price from the manufacturer. The supplier ensures fulfillment of the product range, as well as prompt transportation to the customer.
Properties and application
The steels under consideration are widely used in the automotive industry in the technology of machining of initial blanks on automatic lathes. These steels are used, in particular, for shafts of oil pumps, fasteners, adjusting screws of measuring equipment, etc.
The mechanical properties of calibrated rolled steel AC35G2 and 36SMnPb14 (1.0765) after heat treatment are as follows:
- Tensile strength, MPa - 740;
- Ultimate ductility, MPa - 590;
- Relative elongation, % - 14;
- Brinell hardness, NV - after annealing - not more than 220, after calibration - not more than 280.
Buy a round, bars, tubes of constructional medium-carbon steel with high machinability grades AC35G2 and 36SMnPb14 (1.0765) at the best price from the manufacturer offers the company Evek GmbH. The supplier provides strict fulfillment of the product range and guarantees its delivery to the point specified by the customer.