CuAl11Ni Wire, Round, Bar - C95520
International Equivalent
| Mark | Analogue | W. Nr. | Aisi Uns | En | Order |
|---|---|---|---|---|---|
| C95520 | CuAl11Ni | Delivery from the stock, in stock |
Supplier
We offer to buy bronze wire, rounds, bars C95520 from specialized warehouses of the supplier Evek GmbH with delivery in any city. Full compliance with international quality standards. Supplier Evek GmbH offers to buy bronze wire, round, bar C95520, the price is optimal in this segment of rolled products.
Analogues
| Germany | EU |
|---|---|
| DIN, WNr | EN |
| CuAl11Fe6Ni6-C | 2.0980.01 |
| 2.0980.02 | |
| 2.0980.0 | |
| G-CuAl11Ni | |
| GK-CuAl11Ni | |
| GZ-CuAl11Ni |
Technical feature
This bronze contains up to 12% Al, and 4-7.5% nickel, in addition is alloyed with iron, manganese and zinc. The peculiarity of this alloy is high specific strength and improved mechanical properties.
Percentage composition of EN 1982-2008 (Cu 72 - 82.5%)
| Cu | Fe | Mn | Ni | Al | Zn | Sn | Si | Mg | Pb |
|---|---|---|---|---|---|---|---|---|---|
| base | 4 - 7 | ≤ 2.5 | 4 - 7.5 | 10,5 - 11,5 | ≤0.5 | ≤0.2 | ≤0,1 | ≤0.05 | ≤0.05 |
Mechanical properties (temperature 20 °С)
| Range | s in | sT | d5 | Hardness HB 10 -1 |
|---|---|---|---|---|
| - | MPa | MPa | % | MPa |
| Bar products | 600-750 | 320-380 | 5 | 170-185 |
sT - ultimate strength
sT - limit of proportionality (yield stress for permanent deformation)
d5 - Tensile elongation at break.
HB - Brinell hardness
Applications
Electrical engineering, transport engineering, parts in contact with sea water, marine hatches.
Cold working
Turning, milling, grinding, drilling.
Heat treatment
Normalization, hardening, annealing, tempering.
Storage
Stored in covered warehouses or under a roof, which provides adequate protection against mechanical and other types of damage.
Buy a bargain price.
We offer bronze wire, rounds, bars C95520, price - determined by the technological features of production without the inclusion of additional costs. It is possible to order products with non-standard parameters. In the segment of non-ferrous alloys the company Evek GmbH is a profitable supplier.