Roll, square, aluminum plate Amg5 - 5056 - AlMg5
International Equivalent
| Mark | Analogue | W. Nr. | Aisi Uns | En | Order |
|---|---|---|---|---|---|
| AMG5 | 5056 | AlMg5 | Delivery from the stock, in stock |
Percent remainder (GOST 4784-97)
| Fe | Si | Mn | Ti | Al | Cu | Be | Mg | Zn | Impurities |
|---|---|---|---|---|---|---|---|---|---|
| ≤0.5 | ≤0.5 | 0.3 -0.8 | 0.02 -0.1 | 91.9 -94.68 | ≤0.1 | 0.0002 -0.005 | 4.8 -5.8 | ≤0.2 | ≤0.1 |
Hardness HB 10 -1 = 65 MPa
Mechanical properties (temperature 20°C)
| Range | GOST | s in | sT | d5 |
|---|---|---|---|---|
| - | MPa | MPa | % | |
| Tubes | 18482-79 | 255 | 110 | 15 |
| Tape | 13726-97 | 275 | 130 | 12-15 |
| Profiles | 8617-81 | 255 | 127 | 15 |
| Plate | 17232-99 | 255-265 | 110-120 | 12-13 |
| t°C | E 10- 5 | a 10 6 | l | r | C | R 10 9 |
|---|---|---|---|---|---|---|
| Degree | N/mm2 | 1/Gradus | W/(m-degree) | kg/m3 | J/(kg-degree) | Ohm-m |
| 20 | 0.71 | 2650 | 64 | |||
| 100 | 126 | 922 |
Sv - Ultimate Short-Term Strength
sT - Limit of proportionality (yield strength for permanent deformation)
d5 - Tensile elongation at break.
HB - Brinell hardness
E - Modulus of elasticity of the first kind
C - specific heat capacity
Analogues
| Germany | USA | Japan |
|---|---|---|
| DIN, WNr | JIS | |
| 3.3555 | AA5056 | 5056 |
| AlMg5 |
Buy, bargain price
We offer coils, squares, plates Amg5, or rolled products of similar grades, the price - determined by the technological features of production without the inclusion of additional costs. On the site of the company displays information on the latest arrivals of products. It is possible to order the products of non-standard parameters. We have the best price-quality ratio for the whole range of products. In the segment of non-ferrous alloys Evek GmbH is a profitable supplier.