Steel 06Х12НЗД

  • Steel 10Х18Н5Г9АС4 (EP492; VNS-3)
  • Steel 10Х32Н4Д (EP529)
  • Steel 10Х17Н5М2 (EP405)
  • Steel 10Х17Н13М3Т (ЭИ432)
  • Steel 10Х17Н13М2Т (ЭИ448)
  • Steel 10Х14Г14Н3 (DI-6)
  • Steel 10Х14АГ15 (DI-13)
  • Steel 09Cr17N7Yu1 (0Cr17N7Yu1)
  • Steel 09Х17Н7Ю (ЭИ973)
  • Steel 09Х16Н4Б (EP56; 1Х16Н4Б)
  • Steel 09Х15Н8Ю1 (09Х15Н8Ю; ЭИ904)
  • Steel 08ХГСДП
  • Steel 08Х22Н6Т (EP53)
  • Steel 08Х21Г11А6 (VNS-53)
  • Steel 08Х20Н4АГ10 (НН-3)
  • Steel 08X18Th (DI-77)
  • Steel 08Х18Н7Г10АМ3 (08Х18Н7Г10АМ3С2)
  • Steel 08Cr18Ni5G12AB (HH-3B)
  • Steel 08X18H5G11BAF (HH-3BF)
  • Steel 08X18H4G11AF (HH-3F)
  • Steel 08Cr18Ni12T (0Cr18Ni12T)
  • Steel 08X18H12B (EI402)
  • Steel 08Х18Г8Н2Т (KO-3)
  • Steel 08Cr17Ni6T (DI-21)
  • Steel 20Х13Н4Г9 (ЭИ100)
  • Cr17N14M3T steel
  • Cr17N14M2T steel
  • Steel 95X18 (EI229)
  • Steel 95X13M3K3B2F (EP766)
  • Steel 65X13
  • Steel 40X13 (4X13)
  • Steel 30X13 (3X13)
  • Steel 26Х14Н2 (EP208)
  • Steel 25X17H2B
  • Steel 25X17H2 (EP407)
  • Steel 25Х13Н2 (ЭИ474)
  • Steel 20X17H2 (2X17H2)
  • Steel 08Х17Н15М3Т (ЭИ580)
  • 18X13H3 steel
  • Steel 15Х18Н12С4ТЮ (ЭИ654; 2Х18Н12С4ТЮ)
  • Steel 15Х17АГ14 (ЭП213)
  • Steel 13Х18Н10Г3С2М2 (ЗИ98)
  • Steel 12Х21Н5Т (ЭИ811; 1Х21Н5Т)
  • Steel 12Х18Н13АМ3 (EP878)
  • Steel 12X18H10E (EP47)
  • Steel 12Х17Н8Г2С2МФ (ЗИ126)
  • Steel 12X17G9AN4 (EI878)
  • Steel 12Х13Г12АС2Н2 (DI50)
  • Steel 11Х13Н3
  • Steel 03Х16Н15М3 (ЭИ844)
  • 04X15ST steel
  • Steel 04X17H10M2
  • Steel 03Х23Н6 (ЗИ68)
  • Steel 03Х22Н6М2 (ЗИ67)
  • Steel 03Х21Н25М5ДБ
  • Steel 03Х21Н21М4ГБ (ЗИ35)
  • Steel 03Х20Н45М5Б (ChS32; 03ХН45МБ)
  • Steel 03Х18Н12Т (000Х18Н12Т)
  • Steel 03Х18Н12 (000Х18Н12)
  • Steel 03X18N11 (000X18N11)
  • Steel 03Х17Н14М2
  • Steel 03X17AN9 (EK177)
  • 04X17T steel
  • Steel 03Х15Н35Г7М6Б (EP855)
  • Steel 03X13AG19 (ChS36)
  • Steel 03Х12Н10МТР (EP810; VNS-25)
  • Steel 03Х12К10М6Н4Т (EP927)
  • Steel 03Х11Н10М2Т2 (EP853)
  • Steel 02Х25Н22АМ2 (ChS108)
  • Steel 02Х21Н25М5ДБ (EC5)
  • Steel 02Х21Н21М4Г2Б (ЗИ69)
  • 02Cr18Ni11 steel
  • Steel 02X17H14M3
  • Steel 015Х16Н15М3
  • Steel 06Х14Н6Д2МБТ (EP817)
  • Steel 08Х17Н13М2Т (0Х17Н13М2Т; ЭИ448)
  • Steel 08Х10Н20Т2 (0Х10Н20Т2)
  • Steel 08Х10Н16Т2 (0Х10Н16Т2)
  • Steel 07X21G7AN5 (EP222)
  • Steel 07X18N10P (EP287)
  • Steel 07Х16Н6 (EP288; СН-2А; Х16Н6)
  • Steel 07Х16Н4Б
  • Steel 07Х15Н7М2 (EP35; СН-4; Х15Н8М2Ю)
  • Steel 07Х16Н6
  • Steel 06X18H11 (EI684)
  • 06X15H4DM steel
  • Steel 08Х17Н5М3 (ЭИ925)
  • 06X13H4DM steel
  • Steel 06Х12Н3Д
  • Steel 06Х12Н3Д (08Х12Н3Д)
  • 05KhGB steel
  • Steel 05Х20Н15АГ6 (ChS109)
  • Steel 05Х12Н9М2С3 (EP821)
  • Steel 05Х12Н2К3М2АФ (VNS-40)
  • Steel 04Х32Н8 (EP535)
  • Steel 04Х25Н5М2 (DI62)
  • Steel 04X19MAFT
  • Steel 04X18H10 (EI842)

    • Designation

    Name The value
    Designation GOST Cyrillic 06Х12Н3Д
    Designation GOST Latin 06X12H3D
    Transliteration 06H12N3D
    By chemical elements 06Cr12Н3Cu

    Description

    06Х12НЗД steel is used: for the production of sheets of 25−250 mm, sheet metal, stamped and bent blanks, used for manufacturing components of products of hydrocarbonate (blades, rims and other parts of hydraulic turbines, steam turbines, and exhaust).

    Note

    Corrosion resistant low alloy carbon steel.

    Standards

    Name Code Standards
    Blanks. Of the workpiece. Slabs В31 TU 108.11.891-87

    Chemical composition

    Standard C S P Mn Cr Si Ni Fe Cu
    TU 108.11.891-87 ≤0.06 ≤0.025 ≤0.025 ≤0.6 12-13.5 ≤0.3 2.8-3.2 Rest 0.8-1.1
    Fe is the basis.
    According to TU 108.11.891-87, deviations in chemical composition are allowed: for silicon + 0.20%, for chromium -0.20%, for nickel ± 0.10%, for copper ± 0.10%.

    Mechanical properties

    Section, mm sT|s0,2, MPa σU, MPa d5, % y, % KCU, kJ/m2 HB, MPa
    The workpiece is pressed in the state of delivery on the other 108.11.891-87. The transverse samples. The graph indicates the value of KCU KCU/KCV
    25-250 538-785 ≥637 ≥14 ≥35 ≥490/294 207-293

    Description mechanical marks

    Name Description
    sT|s0,2 Yield strength or limit of proportionality with a tolerance for residual deformation of 0.2%
    σU Limit short-term strength
    d5 Elongation after rupture
    y The relative narrowing
    KCU Toughness
    HB Brinell hardness number