Alloy D19 is used: for the production of power subassemblies of aircraft, car bodies, pipes, operating at temperatures up to +200−250 °C; profile hire for use in the aviation industry and special machine building industries; moulded panels of constant cross section with longitudinal fins in the aircraft industry, is made by a sweep of extruded finned tubes in the plane of the width of the fabric up to 2100 mm.

Standards

Name	Code	Standards
Sheets and strips	В53	GOST 17232-99, OST 1 90246-77, OST 1 90166-75, OST 1 90070-92, TU 1-2-216-81, TU 1-2-217-77, TU 1-2-298-80, TU 1-804-473-2009
Non-ferrous metals, including rare, and their alloys	В51	GOST 4784-97, OST 1 90048-90
Bars	В55	OST 1 90395-91
Bars and shapes	В52	OST 1 92093-83, OST 1 92041-90, OST 1 92067-92, OST 1 92069-77, OST 1 92007-87
Tape	В54	OST 1-92006-79

Chemical composition

Standard	Mn	Si	Fe	Cu	Al	Ti	Zn	Mg	Be
OST 1 90048-90	0.5-1	≤0.5	≤0.5	3.8-4.3	Rest	≤0.1	≤0.1	1.7-2.3	0.0002-0.005
TU 1-804-473-2009	0.5-1	≤0.5	≤0.5	3.8-4.3	Rest	≤0.1	≤0.1	1.7-2.3	0.0002-0.005

Al is the base.
According to GOST 4784-97 and OST 1 90048-90, the mass fraction of each other impurity (not regulated) ≤ 0.05%, the total mass fraction of other impurities ≤ 0.10%. Beryllium is not determined by chemical analysis, but is introduced by calculation.

Mechanical properties

Section, mm	s_T\|s_0,2, MPa	σ_U, MPa	d₅, %	d
The tape is able to supply for OST 1-92006-79
0.8-1.9	-	≤225.4	-	≥10
1.9-10.5	-	≤235.2	-	≥10
5-10.5	≥245	≥401.8	-	≥10
Panels are extruded with fins on OST 1 92041-90 on delivery
	≥255	≥390	≥10	-
	≥295	≥410	≥10	-
Plate in the delivery condition on the other 1-804-473-2009
11-25	≥275	≥420	-	≥7
25-40	≥255	≥390	-	≥5
40-70	≥245	≥370	-	≥4
70-80	≥245	≥345	-	≥3
Plates according to GOST 17232-99 in the delivery condition. T: Quenching + natural aging (samples perpendicular to the plane of the plate)
40-80	-	≥345	-	≥3
Plates according to GOST 17232-99 in the delivery condition. T: Quenching + natural aging (samples transverse)
11-25	≥275	≥420	-	≥7
25-40	≥255	≥390	-	≥5
40-70	≥245	≥370	-	≥4
70-80	≥245	≥345	-	≥3
Profile rolled solid section supplied in OST 1 92093-83
	≥340	≥460	≥12	-

Description mechanical marks

Name	Description
s_T\|s_0,2	Yield strength or limit of proportionality with a tolerance for residual deformation of 0.2%
σ_U	Limit short-term strength
d₅	Elongation after rupture
d	Elongation after rupture

Physical characteristics

Temperature	Е, HPa	r, kg/m³	R, Mr. · m
20	70	2760	61

A description of the physical symbols

Name	Description
Е	The normal elasticity modulus
r	Density
l	Coefficient of thermal conductivity
R	UD. the resistivity
С	Specific heat

Alloy D19 (1190)

Designation

Description