in Dnipro

Mülheim an der Ruhr
Dnieper
Kiev

Alloy Amg3,5

Alloy 1420 (01420)

Alloy 1980 (B48-4)

Alloy ABT101 (1901)

Alloy ABT102 (1903)

Alloy AB (1340)

Alloy AD31 (1310)

Alloy AD31E (1310E)

Alloy AD33 (1330)

Alloy AD35 (1350)

Alloy AK10 (SvAK10)

Alloy AK4 (1140)

Alloy AK4-1 (1141)

Alloy AK4-2 (1143)

Alloy AK6 (1360)

Alloy AK8 (1380)

Alloy AMg0.5 (1505)

Alloy AMG1 (1510)

Alloy AMg2 (1520)

Alloy AMg3 (1530)

Alloy AMg4 (1540)

Alloy AMg5 (1550)

Alloy AMg5P (1557)

Alloy AMg6 (1560)

Alloy AMg61 (1561)

Alloy AMg61H (1561H)

Alloy AMg63 (СвАМг63)

Alloy AMZ (1400)

Alloy AMTS (1401)

Alloy AMSh1 (AMSh-1)

Alloy APBA-1 (1551)

Alloy B65 (1165)

Alloy B91 (1913)

Alloy B92 (1920)

Alloy B93 (B93pch; 1930)

Alloy B94 (1940)

Alloy B95 (1950)

Alloy B95P (1957)

Alloy B96C (1960)

Alloy B96C3 (1965-1)

Alloy VD17 (1170)

Alloy D1 (1110)

Alloy D12 (1521)

Alloy D16 (1160)

Alloy D16P (1167)

Alloy D18 (1180)

Alloy D19 (1190)

Alloy D19P (1197)

Alloy D1P (1117)

Alloy D20 (1200)

Alloy D21 (1210)

Alloy D23 (WAD23; 1230)

Alloy D24 (VAD1; 1191)

Alloy K48-2 (1941)

Alloy K48-2pch (1943)

Alloy MM (1403)

Designation

Name	The value
Name	The value
Designation GOST Cyrillic	АМг3,5
Designation GOST Latin	AMg3,5
Transliteration	AMg35
By chemical elements	-

Description

Alloy Amg3,5 is used: for the manufacture of semi-finished rolled by hot or cold deformation; details of aviation.

Note

The alloy system Al-Mg.
ISO 209−1 brand alloy Amg3,5 is designated AlMg3,5 and 5154.

Standards

Name	Code	Standards
Name	Code	Standards
Non-ferrous metals, including rare, and their alloys	В51	GOST 4784-97
Bars and shapes	В52	OST 1 92093-83

Chemical composition

Standard	Mn	Cr	Si	Fe	Cu	Al	Ti	Zn	Mg	Be
Standard	Mn	Cr	Si	Fe	Cu	Al	Ti	Zn	Mg	Be
GOST 4784-97	≤0.1	0.15-0.35	≤0.25	≤0.4	≤0.1	Rest	≤0.2	≤0.2	3.1-3.9	≤0.0008

Al is the base.
According to GOST 4784-97, the total mass fraction of manganese and chromium should be in the range of 0.10-0.50%, the mass fraction of each other impurity (not regulated) ≤ 0.05%, the total mass fraction of other impurities ≤ 0.15%.

Physical characteristics

Temperature	r, kg/m³
Temperature	r, kg/m³
20	2660

A description of the physical symbols

Name	Description
Name	Description
r	Density

Technological properties

Name	The value
Name	The value
Weldability	The alloy is well welded all types of welding - TIG, contact, spot, and seam welding. Weld joint efficiency is 0.9-0.95 % of the strength of the basic material.
Pressure treatment	Well-deformed in hot and cold condition.
Corrosion resistance	Alloy with excellent General corrosion resistance, not cloned to stress corrosion cracking and intergranular corrosion (especially in the annealed condition). For additional protection parts against corrosion is anodizing or applied coatings. The corrosion resistance of the alloy (and the weld) high, is almost the same as that of pure aluminum.
Machinability	Machinability is satisfactory.