Alloy AK6−1 is used: for the manufacture of pressed extra virgin rods; stamped and forged parts of complex shape and medium strength of the aviation industry (impellers, sub frames, fittings, pumping units, fasteners).

Standards

Name	Code	Standards
Non-ferrous metals, including rare, and their alloys	В51	OST 1 90048-90
Processing of metals by pressure. Forgings	В03	OST 1 90073-85
Bars and shapes	В52	OST 1 92093-83

Chemical composition

Standard	Mn	Cr	Si	Ni	Fe	Cu	Al	Ti	Zn	Mg
OST 1 90048-90	0.4-0.8	0.01-0.2	0.7-1.2	≤0.1	≤0.7	1.8-2.6	Rest	0.02-0.1	≤0.3	0.4-0.8

Al is the base.
According to OST 1 90048-90 the total mass fraction of Fe + Ni ≤ 0.70%, the total mass fraction of other impurities ≤ 0.10%. The sum of all impurities is ≤ 1.10%.

Mechanical properties

Section, mm	s_T\|s_0,2, MPa	σ_U, MPa	d₅, %	HB, MPa
Forgings up to 300 mm punching up to 200 mm for OST 1 90073-85. Mode T1: Quenching + artificial aging (indicated by the direction of samples)
	-	≥345	≥6	≥95
	-	≥365	≥8	≥95
	≥245	≥365	≥7	≥100
	≥275	≥380	≥10	≥100

Description mechanical marks

Name	Description
s_T\|s_0,2	Yield strength or limit of proportionality with a tolerance for residual deformation of 0.2%
σ_U	Limit short-term strength
d₅	Elongation after rupture
HB	Brinell hardness number

Physical characteristics

Temperature	Е, HPa	r, kg/m³	R, Mr. · m
20	72	2750	41

A description of the physical symbols

Name	Description
Е	The normal elasticity modulus
r	Density
l	Coefficient of thermal conductivity
R	UD. the resistivity

Technological properties

Name	The value
Weldability	Welding is done in the environment of protective gases.
Features of heat treatment	Heat-treatable alloy.

Alloy AK6-1

Designation

Description