Designation
| Name |
The value |
| Designation GOST Cyrillic |
АМг0,5пч |
| Designation GOST Latin |
AMg0,5pch |
| Transliteration |
AMg05pch |
| By chemical elements |
- |
Description
Alloy Amg0,5пч used: for the manufacture of semi-finished products (sheets, strips, plates, sheets, bars, rods, profiles, panels, pipes, stampings and forgings) by hot or cold deformation, as well as ingots and slabs; welded and riveted structural elements of aircraft construction and shipbuilding, experiencing a relatively light load and require high corrosion resistance.
Note
Alloy high quality and purity of the system Al-Mg.
Standards
| Name |
Code |
Standards |
| Non-ferrous metals, including rare, and their alloys |
В51 |
OST 1 92014-90 |
Chemical composition
| Standard |
Mn |
Si |
Fe |
Cu |
Al |
Ti |
Zn |
Mg |
| OST 1 92014-90 |
≤0.1 |
≤0.07 |
≤0.08 |
≤0.05 |
Rest |
≤0.03 |
≤0.04 |
0.4-0.8 |
Al is the base.
According to OST 1 92014-90 the total mass fraction of other (not regulated0 impurities ≤ 0.10%.
Technological properties
| Name |
The value |
| Weldability |
The alloy is well welded all types of welding - TIG, contact, spot, and seam welding. The corrosion resistance of the alloy (and the weld) high, is almost the same as that of pure aluminum. |
| Machinability |
The poor machinability in the annealed condition and satisfactory cold-worked. |
| Pressure treatment |
Well-deformed in hot and cold condition. |
| Corrosion resistance |
Alloy with excellent General corrosion resistance, not cloned to stress corrosion cracking and intergranular corrosion (especially in the annealed condition). For additional protection parts against corrosion is anodizing or applied coatings. |
| Soldering |
Alloy satisfactorily soldered. |
