Steel 12Х3ГНМФБА

Designation

Name The value
Designation GOST Cyrillic 12Х3ГНМФБА
Designation GOST Latin 12X3GHMFBA
Transliteration 12H3GNMFBA
By chemical elements 12Cr3MnНMoVNb

Description

12Х3ГНМФБА steel is used: for the production of seamless hot-deformed pipes used for the fabrication of parts by machining; pressure vessel.

Standards

Name Code Standards
Steel pipes and fittings to them В62 TU 1308-005-33116077-2001

Chemical composition

Standard C S P Mn Cr Si Ni Fe Cu V Mo Nb Ca
TU 1308-005-33116077-2001 0.12-0.16 ≤0.005 ≤0.015 0.9-1.2 2.9-3.2 0.2-0.37 0.9-1.2 Rest ≤0.3 0.05-0.1 0.25-0.35 0.02-0.05 0.005-0.03
Fe is the basis.
According to TU 1308-005-33116077-2001, calcium is introduced into the steel by calculation. Permissible deviations in chemical composition (in% of mass): carbon + 0.02 / -0.01, manganese ± 0.15, silicon ± 0.05, chromium ± 0.25, copper ± 0.05, nickel ± 0, 10, molybdenum ± 0.02, vanadium ± 0.02, niobium ± 0.01, phosphorus + 0.002, sulfur + 0.005.

Mechanical properties

Section, mm σU, MPa d5, % KCU, kJ/m2 HB, MPa
The mechanical properties of the steel, defined on T/o samples cut from the pipes on the other 1308-005-33116077-2001. Normalization at 900-920 °With (extract 10 min), air cooling + Vacation at 500-550 °C (exposure 2 hours), air cooling
980-1180 ≥14 ≥590 ≥270
Pipe the seamless hot-deformed heat-treated in the delivery condition on the other 1308-005-33116077-2001. Normalization at 950-980 °C (delay 2-3 hours), air cooling + Vacation at 720-750 °C (exposure 5-6 h), air cooling
- - - - ≤217

Description mechanical marks

Name Description
σU Limit short-term strength
d5 Elongation after rupture
KCU Toughness
HB Brinell hardness number

Physical characteristics

Temperature r, kg/m3
20 7850

A description of the physical symbols

Name Description
Е The normal elasticity modulus
l Coefficient of thermal conductivity
R UD. the resistivity