Steel SV-09ХГНМТА

  • Steel Sv-10GN3SMD
  • Sv-08GSMT steel
  • Steel Sv-08H15N23V7G7M2 (EP88)
  • Steel Св-08Х19Н10Г2Б (ЭИ898; Н-89)
  • Steel Sv-08X1Du
  • Steel Св-08Х20Н9С2БТЮ (EP156)
  • Steel Св-08Х25Н20С3Р1 (EP532)
  • Steel Sv-08HG2SDU
  • Sv-08HN2GMTA steel
  • Sv-09HNMTA steel
  • Sv-09HNMTAA steel
  • Sv-09HN4MDTA steel
  • Sv-10HN1MA steel
  • Sv-10HN2SMD steel
  • Sv-08GM steel
  • Sv-10GSM steel
  • Sv-10Nu steel
  • Steel Sv-10Kh16N25AM6 (EI395; H-66)
  • Steel Св-10Х16Н25М6АФ (ЗИ112)
  • Steel Sv-10H19N11M4F (EP647)
  • Sv-10H19H23G2M5FAT (EP868)
  • Steel Sv-10Х21Н11ФТ (EP854)
  • Sv-10X2M steel
  • Sv-10HGSN2MT steel
  • Sv-10KhMFTU steel
  • Sv-10KhMFTU-A steel
  • Sv-12M steel
  • Sv-12Kh2NMA steel
  • Steel Sv-06H15N35G7M6B (EP582)
  • Steel Sv-01Kh12N6M (ChS48)
  • Steel Св-01Х19Н18Г10АМ4 (EP690)
  • Steel Sv-03GKhN2MD
  • Steel Sv-03GKhN3MD
  • Steel Sv-03HN3MD
  • Sv-04N2GSTA steel
  • Sv-04N2GTA steel
  • Sv-04N3GMTA steel
  • Sv-04N3GSMTA steel
  • Steel Sv-04H19H11M3 (H-65)
  • Sv-04Cr19Ni (04Cr19N9) steel
  • Sv-04H20N10G2B (EP762)
  • Sv-06H14GMFBA steel
  • Steel Sv-08GN2SMD
  • Steel Sv-06Х21Н7БТ (EP500)
  • Sv-06Cr3G2SmFtu4 steel
  • Sv-06Kh8G2SMFtu4 steel
  • Steel Sv-07H22H13G5ST (ChS49)
  • Steel Sv-07Cr25H13 (H-71)
  • Steel Sv-07CGSN3MD
  • Steel Sv-07HN3MD
  • Sv-08 steel
  • Sv-08G1NMT steel
  • Sv-08G1S steel
  • Sv-08G2SM steel
  • Sv-08G2SNMT steel
  • Sv-08G2SNTYR steel

    • Designation

    Name The value
    Designation GOST Cyrillic Св-09ХГНМТА
    Designation GOST Latin Cb-09XGHMTA
    Transliteration Sv-09HGNMTA
    By chemical elements 09CrMnНMoTi

    Description

    Steel SV-09ХГНМТА used: for the production of welding wire with a diameter of 3−5 mm, used for welding steels of 15Х2НМФА and 15Х3НМФА various modifications category КП45 strength at 350 °C in thicknesses up to 400 mm, including a narrow-gap butchering. Have a good adaptability. The weld metal made using the welding wire characterized by high resistance to embrittlement under the influence of neutron irradiation and thermal embrittlement in service. Provide Тк0 weld not higher than -15 °C.

    Standards

    Name Code Standards
    Welding and cutting metals. Soldering, riveting В05 TU 14-1-3675-2001

    Chemical composition

    Standard C S P Mn Cr Si Ni Fe Cu N As Al V Ti Mo Sn Sb Co
    TU 14-1-3675-2001 0.07-0.11 ≤0.012 ≤0.012 0.8-1.05 1.6-1.9 0.17-0.3 1-1.3 Rest ≤0.1 ≤0.02 ≤0.01 ≤0.05 ≤0.03 0.05-0.11 0.5-0.7 ≤0.001 ≤0.008 ≤30
    Fe is the basis.
    According to TU 14-1-3675-2001, the chemical composition is presented for steel grade Sv-09HGNMTA. Deviations in the mass fraction are permissible: manganese -0.050%, chromium and nickel -0.10% each, nitrogen + 0.0050%, other elements - within the requirements of GOST 2246 for alloyed steel wire. Individual deviations in the mass fraction in the chemical composition of the steel are allowed to be agreed with the consumer enterprise.