Steel SV-07Х22Н13Г5СТ (ЧС49)

Designation

Name	The value
Designation GOST Cyrillic	Св-07Х22Н13Г5СТ
Designation GOST Latin	Cb-07X22H13G5CT
Transliteration	Sv-07H22N13G5ST
By chemical elements	07Cr22Н13Mn5СTi

Name	The value
Designation GOST Cyrillic	ЧС49
Designation GOST Latin	ChC49
Transliteration	ChS49
By chemical elements	ZrС49

Description

Steel SV-07Х22Н13Г5СТ used: for the production of forged square billets with section of 85х85 mm and 125х125 mm, intended for further manufacture of welding wire.

Note

Steel corrosion resistant heat resistant.

Standards

Name	Code	Standards
Blanks. Of the workpiece. Slabs	В31	TU 14-1-1213-75, TU 14-1-4241-87

Chemical composition

Standard	C	S	P	Mn	Cr	Si	Ni	Fe	Ti
TU 14-1-4241-87	≤0.07	≤0.015	≤0.02	5-6	21-23	0.8-1.2	12-14	Rest	0.2-0.5

Fe is the basis.
According to TU 14-1-4241-87, the chemical composition is presented for steel grade Sv-07H22N13G5ST (ChS49), melted in a plasma arc furnace and steel grade Sv-07H22N13G5ST-Sh (CS49-Sh) electroslag remelting. Deviations from the indicated chemical composition are allowed: carbon +0.010%, manganese + 0.50%, silicon +0.30%, titanium +0.10%, sulfur + 0.5050%, phosphorus +0, 0050%. Other deviations are allowed upon agreement between the supplier and the customer. Calcium is applied to steel to 0.10%, yttrium to 0.050%, cerium to 0.20%, boron to 0.040%, the content of which is not determined by chemical analysis. Aluminum is injected into the steel with 2.20% calculated without taking into account the fumes. The aluminum content in the finished metal is not determined and the certificate is not introduced.

Technological properties

Name	The value
Macrostructure and pollution	Macrostructure of steel billets on the other 14-1-4241-87 intended for production of welding rod, check on cross microtemplate taken from a supply profile must not have podnasadochnogo looseness, fistulas, cracks, inclusions of local coarse heterogeneity (elektroprenos), inversion of the crust that are visible without using the magnifying devices. Permitted defects of a macrostructure scales GOST 10243: Central porosity ≤ 1.0 points; - point nonuniformity ≤ 1.0 points; - exudation square ≤ 1.0 points. In the metal ESR (electroslag remelting) is allowed layer-by-layer crystallization and light the path to a score of 3.