Steel SV-08ХН2ГМТА

  • Steel Sv-10GN3SMD
  • Sv-08GSMT steel
  • Steel Sv-08H15N23V7G7M2 (EP88)
  • Steel Св-08Х19Н10Г2Б (ЭИ898; Н-89)
  • Steel Sv-08X1Du
  • Steel Св-08Х20Н9С2БТЮ (EP156)
  • Steel Св-08Х25Н20С3Р1 (EP532)
  • Steel Sv-08HG2SDU
  • Sv-08HN2GMTA steel
  • Sv-09HNMTA steel
  • Sv-09HNMTAA steel
  • Sv-09HN4MDTA steel
  • Sv-10HN1MA steel
  • Sv-10HN2SMD steel
  • Sv-08GM steel
  • Sv-10GSM steel
  • Sv-10Nu steel
  • Steel Sv-10Kh16N25AM6 (EI395; H-66)
  • Steel Св-10Х16Н25М6АФ (ЗИ112)
  • Steel Sv-10H19N11M4F (EP647)
  • Sv-10H19H23G2M5FAT (EP868)
  • Steel Sv-10Х21Н11ФТ (EP854)
  • Sv-10X2M steel
  • Sv-10HGSN2MT steel
  • Sv-10KhMFTU steel
  • Sv-10KhMFTU-A steel
  • Sv-12M steel
  • Sv-12Kh2NMA steel
  • Steel Sv-06H15N35G7M6B (EP582)
  • Steel Sv-01Kh12N6M (ChS48)
  • Steel Св-01Х19Н18Г10АМ4 (EP690)
  • Steel Sv-03GKhN2MD
  • Steel Sv-03GKhN3MD
  • Steel Sv-03HN3MD
  • Sv-04N2GSTA steel
  • Sv-04N2GTA steel
  • Sv-04N3GMTA steel
  • Sv-04N3GSMTA steel
  • Steel Sv-04H19H11M3 (H-65)
  • Sv-04Cr19Ni (04Cr19N9) steel
  • Sv-04H20N10G2B (EP762)
  • Sv-06H14GMFBA steel
  • Steel Sv-08GN2SMD
  • Steel Sv-06Х21Н7БТ (EP500)
  • Sv-06Cr3G2SmFtu4 steel
  • Sv-06Kh8G2SMFtu4 steel
  • Steel Sv-07H22H13G5ST (ChS49)
  • Steel Sv-07Cr25H13 (H-71)
  • Steel Sv-07CGSN3MD
  • Steel Sv-07HN3MD
  • Sv-08 steel
  • Sv-08G1NMT steel
  • Sv-08G1S steel
  • Sv-08G2SM steel
  • Sv-08G2SNMT steel
  • Sv-08G2SNTYR steel

    • Designation

    Name The value
    Designation GOST Cyrillic Св-08ХН2ГМТА
    Designation GOST Latin Cb-08XH2GMTA
    Transliteration Sv-08HN2GMTA
    By chemical elements 08CrН2MnMoTi

    Description

    Steel SV-08ХН2ГМТА usedfor producing welding rod, welding, surfacing and production of electrodes.

    Note

    A steel alloy.

    Standards

    Name Code Standards
    Bars and shapes В32 TU 14-1-4054-85
    Welding and cutting metals. Soldering, riveting В05 TU 14-1-4345-87

    Chemical composition

    Standard C S P Mn Cr Si Ni Fe Cu Ti Mo
    TU 14-1-4054-85 0.06-0.11 ≤0.012 ≤0.015 0.8-1.1 0.25-0.45 ≤0.2 2.1-2.5 Rest ≤0.25 0.05-0.12 0.25-0.45
    Fe is the basis.
    According to TU 14-1-4054-85 the chemical composition is given for steel grade Sv-08HN2GMTA-Sh. The nitrogen content in the rod must not be more than 0.015%. It is allowed to supply wire with a deviation from the norms of chemical composition in accordance with paragraph 3.5. GOST 2246, subject to other requirements of the Specification.

    Technological properties

    Name The value
    Macrostructure and pollution In the macrostructure of wire rod, are not allowed discontinuity of the metal caused by the presence of shrinkage, axial looseness, bubbles, cracks, delamination and inclusions.
    Microstructure Wire rod microstructure should be uniform. Padalka (martensitic and rotomachinery areas) is not allowed.