Alloy 36N
Designation
Description
Alloy 36N used: for the manufacture of parts of instruments, requiring constant size in the range of climatic temperatures; as the passive layer in the manufacture of thermostatic bimetallic, is used for making sensitive to the temperature change of the elements of control and measuring instruments and apparatus.
When using alloy grade 36N and the active layer of the alloy 75GND made thermobimetals brand ТБ200/113 (ТБ2013), which is used for the manufacture of heat-sensitive elements of the devices (thermal relay, fuse, thermometers and so on.).
When using alloy grade 36N and the active layer of the alloy 20NG made thermobimetals brand ТБ148/79 (ТБ1523), which is used for the manufacture of heat-sensitive elements of devices (compensators, relay protection, etc.).
When using alloy grade 36N and the active layer of the alloy 24NKH made thermobimetals brand ТБ138/80 (ТБ1423), which is used for the manufacture of heat-sensitive elements of devices (relays, regulators, pulse sensors, fuses, etc.).
When using alloy grade 36N and the active layer of the alloy 19NKH made thermobimetals brand ТБ129/79 (ТБ1323), which is used for the manufacture of heat-sensitive elements of devices (relays, regulators, pulse sensors, fuses, etc.).
Note
Alloy with a minimum CTE of 1.5·10-6 deg-1 in the temperature range from minus 60 to plus 100 °C.
Thermobimetals ТБ200/113 (ТБ2013) with high coefficient sensitivity (30−36)·10-6 deg-1, with a high specific electric resistance (the 1.08−1.18) Ω·mm2/m.
Thermobimetals ТБ148/79 (ТБ1523) with high coefficient sensitivity (21−25)·10-6 deg-1, with a high specific electrical resistance (0,77−0,82) Ohm·mm2/m.
Thermobimetals ТБ138/80 (ТБ1423) with high coefficient sensitivity (20−24)·10-6 deg-1, with a high specific electrical resistance (0,77−0,84) Ohm·mm2/m.
Thermobimetals ТБ129/79 (ТБ1323) with high coefficient sensitivity (18,5−22,5)·10-6 deg-1, with a high specific electrical resistance (0,76−0,83) Ohm·mm2/m.
Standards
Chemical composition
According to GOST 10994-74, the 36N alloy can be manufactured with the mass fraction of carbon not more than 0.10% by agreement of the parties. According to the manufacturer's agreement with the consumer when smelting in 40-ton furnaces, the mass fraction of vanadium, molybdenum, aluminum, not more than 0.15% of each chromium, and not more than 0.2% is allowed in the 36N alloy.
In the production of alloy 36H as a constituent of terbiometals, the content of S≤0,020%, P≤0,020%, the content of V, Al, Mo and Cu is not regulated.