Molybdenum M99,9-MP

  • Molybdenum M-5
  • Molybdenum M-6
  • M99.9-MP molybdenum
  • M99.95-MP molybdenum
  • Molybdenum MK
  • Molybdenum MRN
  • Molybdenum MS
  • Molybdenum MF
  • Molybdenum PMVP
  • Molybdenum MCC

    • Designation

    Name The value
    Designation GOST Cyrillic М99,9-МП
    Designation GOST Latin M99,9-MP
    Transliteration M999-MP
    By chemical elements Cu99,9-CuП

    Description

    Molybdenum M99,9-MP is usedfor producing sheet metal by powder metallurgy, used in the electronic, electrical, glass industry, power engineering and chemical equipment in high temperature technology.

    Standards

    Name Code Standards
    Hard alloys, ceramic-metal products and metal powder В56 TU 14-22-149-2001

    Chemical composition

    Standard C Si Ni Fe N Al Mo Ca O Mg
    TU 14-22-149-2001 ≤0.02 ≤0.01 ≤0.005 ≤0.014 ≤0.008 ≤0.005 ≥99.9 ≤0.007 ≤0.02 ≤0.003
    Mo is the basis.
    According to TU 14-22-149-2001, the chemical composition is given for sheet rolled products of molybdenum grade M99.9-MP. The mass fraction of molybdenum is determined by subtracting 100% of the amount of controlled metallic impurities without taking into account the gas-forming impurities (carbon, oxygen and nitrogen). The total content of metal impurities is guaranteed by the manufacturer and should not exceed 0.10%.

    Mechanical properties

    Section, mm σU, MPa d
    Flats on the other 14-22-149-2001. Annealing in a protective atmosphere at 900 °C for 30 minutes
    0.3-0.5 ≥760 ≥6
    0.5-1.5 ≥725 ≥10
    1.5-2.5 ≥690 ≥14
    12.7-25.4 ≥655 ≥2
    2.5-4.75 ≥690 ≥18
    25.4-38 ≥655 ≥1
    4.75-12.7 ≥690 ≥10

    Description mechanical marks

    Name Description
    σU Limit short-term strength
    d Elongation after rupture