Molybdenum M99 95-MP

  • Molybdenum M-5
  • Molybdenum M-6
  • M99.9-MP molybdenum
  • M99.95-MP molybdenum
  • Molybdenum MK
  • Molybdenum MRN
  • Molybdenum MS
  • Molybdenum MF
  • Molybdenum PMVP
  • Molybdenum MCC

    • Designation

    Name The value
    Designation GOST Cyrillic М99,95-МП
    Designation GOST Latin M99,95-MP
    Transliteration M9995-MP
    By chemical elements Cu99,95-CuП

    Description

    Molybdenum M99 95-MP used: for the production of sheet metal by powder metallurgy, used in the electronic, electrical, glass industry, power engineering and chemical equipment in high temperature technology.

    Standards

    Name Code Standards
    Hard alloys, ceramic-metal products and metal powder В56 TU 14-22-149-2001

    Chemical composition

    Standard C Si Ni Fe N Al Mo Ca O Mg
    TU 14-22-149-2001 ≤0.01 ≤0.01 ≤0.005 ≤0.01 ≤0.005 ≤0.005 ≥99.95 ≤0.007 ≤0.007 ≤0.003
    Mo is the basis.
    According to TU 14-22-149-2001, the chemical composition is given for sheet rolled products of molybdenum grade M99.95-MP. The mass fraction of molybdenum is determined by subtracting 100% of the amount of controlled metallic impurities without taking into account the gas-forming impurities (carbon, oxygen and nitrogen). The total content of metallic impurities is guaranteed by the manufacturer and should not exceed 0.050%.

    Mechanical properties

    Section, mm σU, MPa d
    Flats on the other 14-22-149-2001. Annealing in a protective atmosphere at 900 °C for 30 minutes
    0.3-0.5 ≥760 ≥6
    0.5-1.5 ≥725 ≥10
    1.5-2.5 ≥690 ≥14
    12.7-25.4 ≥655 ≥2
    2.5-4.75 ≥690 ≥18
    25.4-38 ≥655 ≥1
    4.75-12.7 ≥690 ≥10

    Description mechanical marks

    Name Description
    σU Limit short-term strength
    d Elongation after rupture