Brass Lomsh70-1-0,04

  • Brass LO70-1
  • Brass LMZA57-3-1
  • Brass LMzAJKS70-7-5-2-2-1
  • Brass LMZh57-1,5-0,75
  • Brass LMtsKA58-2-1-1
  • Brass LMtsKNS58-3-1,5-1,5-1
  • Brass LMtsKNSA58-3-1,5-1,5-1
  • Brass LMtsSKa58-2-2-1-1
  • Brass LMsh68-0,05
  • Brass LN65-5
  • Brass LNKMts49-10-0,3-0,2
  • Brass LNKoMts49-9-0,2-0,2
  • Brass ЛНМц60-9-5
  • Brass LO60-1
  • Brass LO62-1
  • Brass LKS65-1,5-3
  • Brass LO90-1
  • Brass LOK59-1-0.3
  • Brass LOMNA49-0,5-10-0,4-0,4
  • Brass Lomsh70-1-0.04
  • Brass Lomsh70-1-0.05
  • Brass LS58-2
  • Brass LS58-3
  • Brass LS59-1
  • Brass LS59-1B
  • Brass LS59-2
  • Brass LS60-1
  • Brass LS63-3
  • Brass LS64-2
  • Brass LS74-3
  • Brass LA85-0.5
  • Brass L59
  • Brass L60
  • Brass L63
  • Brass L66
  • Brass L68
  • Brass L70
  • Brass L72
  • Brass L75mk
  • Brass L80
  • Brass L85
  • Brass L90
  • Brass L96
  • Brass LA77-2
  • Brass LA77-2u
  • Brass LMZ58-2
  • Brass LAJ60-1-1 (LAJ60-1-1L)
  • Brass LAZHMTS52-2-1-1,5-1
  • Brass LAMsh77-2-0,04
  • Brass LAMSh77-2-0,05
  • Brass LAN59-3-2
  • Brass LANKMZ 75-2-2,5-0,5-0,5 (alloy 156)
  • Brass LAF94-0,5-0,15
  • Brass LZMc59-1-1
  • Brass LZhS58-1-1
  • Brass LC62-0.5
  • Brass LK75B
  • Brass LCAN80-1-1,9-5,8
  • Brass ЛКАНМЦ75-2-2,5-0,5-0,5
  • Brass LCBO62-0,2-0,04-0,5

    • Designation

    Name The value
    Designation GOST Cyrillic ЛОМш70-1-0,04
    Designation GOST Latin LOMsh70-1-0,04
    Transliteration LOMsh70-1-004
    By chemical elements ЛSnCuш70-1-0,04

    Description

    Brass Lomsh70−1-0,04 used: for the manufacture of condenser tubes; drawn tubes for heat exchangers.

    Note

    Complex alloyed brass.

    Standards

    Name Code Standards
    Tape В54 GOST 15527-2004
    Tubes of non-ferrous metals and alloys В64 GOST Р 51573-2000

    Chemical composition

    Standard P Fe Cu As Zn Sn Sb Pb Bi
    GOST 15527-2004 ≤0.01 ≤0.07 69-71 0.02-0.04 Rest 1-1.5 ≤0.005 ≤0.07 ≤0.002
    Cu is the basis.
    According to GOST R 51573-2000, GOST 15527-2004 the sum of other elements should be ≤ 0.30%. In brass, the mass fraction of nickel is allowed up to 0.50% due to the mass fraction of copper, which is not taken into account in the sum of other impurities. The manufacture of brass is allowed without the mass fraction of arsenic.

    Mechanical properties

    sT|s0,2, MPa σU, MPa d10 HV, MPa
    Tube, drawn, 10-50 mm for heat exchangers supplied according to GOST R 51573-2000 (samples)
    ≥100 ≥320 ≥45 -
    ≥150 ≥360 ≥40 80-125

    Description mechanical marks

    Name Description
    sT|s0,2 Yield strength or limit of proportionality with a tolerance for residual deformation of 0.2%
    σU Limit short-term strength
    d10 Elongation after rupture
    HV The Vickers hardness

    Physical characteristics

    Temperature Е, HPa r, kg/m3 l, W/(m · °C) R, Mr. · m
    20 104 8600 117 710

    A description of the physical symbols

    Name Description
    r Density
    l Coefficient of thermal conductivity